ramtyper19

Hey guys, I wondering what injectors to run.. Heres my set up,
B18c1
wiesco 11.1 pistons
Mugen Head Gasket
Head sightly milled (total CR 12.1)
Shot peen rods
Complete Rocket Motor Sports Mx22xx Head Package.
Walbro 255
Zex 75 wet shot.

I was gonna get some 310's but was thinking more 440's..
But if I get the 440's even without NOS can't the tuner just use whats needed of the 440 injector. Gonna use two ECU's NOS & ALL MOTOR

Thanks

96 GSR-T

This belongs in the ALL MOTOR forumn

ramtyper19

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 96 GSR-T &raquo;</TD></TR><TR><TD CLASS="quote">This belongs in the ALL MOTOR forumn</TD></TR></TABLE>

Isn't Nitrous Forced Induction???

96 GSR-T

I guess.....

I would just use the 440's, I am done being a dick for now

redzcstandardhatch

i'd cheap out and go with dsm 450's.

i read somewhere they are more reliable and have a better spray pattern than RC's.

sounds like a FUN setup. what car is it in?

you can switch fuel maps with some engine managment systems. i think 2 ecu's would be silly, but it would work.

ever since last weekend when i saw a local kid instantly at 100 hp on the dyno w/ nitrous, i've thought differently about it.

ramtyper19

Hummm.... DSM??? Sounds like a plan..
Its in a 92 Hatch Si. Can't wait to break it in and get it tuned..
&lt;&lt;&lt;&lt;-----------
Anyone know more about the DSM injectors.

nonvtecD

Yeah, everyone is using the DSM injectors because you can get a set for $50 and theyre plentiful. You need to install a resistor box because the injectors are peak and hold and you need to bore out your stock injector seals, then you're ready to go.

redzcstandardhatch

dsm=diamond star motors

i'm refering to the stock injectors in the manual turbo eclipse/talon/laser things.

ramtyper19

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redzcstandardhatch &raquo;</TD></TR><TR><TD CLASS="quote">dsm=diamond star motors

i'm refering to the stock injectors in the manual turbo eclipse/talon/laser things. </TD></TR></TABLE>

Ha..... I know what DSM injectors are but I'm a little up tight when it comes to my car.. Installation of a resistor box is OUT OF THE QUESTION... I hate to cut harnesses, in fact I don't even want to cut my wire harness to install the RC's. Do any company make OBD 2 injectors... I know of accel & msd!!!

racinskittle

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ramtyper19 &raquo;</TD></TR><TR><TD CLASS="quote">Ha..... I know what DSM injectors are but I'm a little up tight when it comes to my car.. Installation of a resistor box is OUT OF THE QUESTION... I hate to cut harnesses, in fact I don't even want to cut my wire harness to install the RC's. Do any company make OBD 2 injectors... I know of accel & msd!!! </TD></TR></TABLE>

Cut the damn harness you baby

ramtyper19

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racinskittle &raquo;</TD></TR><TR><TD CLASS="quote">

Cut the damn harness you baby</TD></TR></TABLE>

I NOT A BABY.....(runs off crying) LOL

racinskittle

lolllllll. RC makes saturated injectors as well you know....otherwise you can get a nice set of precision