msd digital 6 compared to the traditional msd 6al?
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Somewhere on the West coast, USA
Posts: 5,458
Likes: 0
Received 0 Likes
on
0 Posts
msd digital 6 compared to the traditional msd 6al?
is the digital 6 the same exact thing as the traditional msd 6al, but just has all the other goodies like 2step and such? lemme know
#4
all I know is I had a Digital 6 and it malfunctioned and robbed the car of about 100+whp at least, so I switched to a 6A and that worked fine
It may have been just a defective unit, though--I highly doubt that happens with most Digital 6's.
If you have Hondata, etc. then you don't really need all that other stuff that comes with the Digital 6 because Hondata has the rev limiter/launch control.
It may have been just a defective unit, though--I highly doubt that happens with most Digital 6's.
If you have Hondata, etc. then you don't really need all that other stuff that comes with the Digital 6 because Hondata has the rev limiter/launch control.
#5
Re: (pimpintyperintegra)
stay away from the dig6+, if you want anything get the dig7 (not the race unit)
The six is tight as **** when it works, notice I said "when it works" I have one that i have already sent in and still doesn't work. a few of my buddyes with tell you the same thing, I know a hand full of people right now that have non working units. And no our wiring is not fucked up.
The six is tight as **** when it works, notice I said "when it works" I have one that i have already sent in and still doesn't work. a few of my buddyes with tell you the same thing, I know a hand full of people right now that have non working units. And no our wiring is not fucked up.
#7
Honda-Tech Member
Join Date: Oct 2000
Location: Zoo York
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: msd digital 6 compared to the traditional msd 6al? (importboi22)
iv seen so many crap out its not even funny... when they do work though... they do work good
Trending Topics
#8
Honda-Tech Member
iTrader: (1)
Join Date: Oct 2003
Location: springfield, missouri, usa
Posts: 1,683
Likes: 0
Received 1 Like
on
1 Post
Re: msd digital 6 compared to the traditional msd 6al? (ek9t)
So I was thinking I would want to get the MSD 6BTM as seen here http://www.c-speedracing.com/howto/msdbtm/msd.php but is that the same as what you guys are talking about?
In other words would it have reliabilty issues as well?
In other words would it have reliabilty issues as well?
#9
Honda-Tech Member
Join Date: Aug 2002
Location: JDM ricer land, CA
Posts: 2,901
Likes: 0
Received 0 Likes
on
0 Posts
Re: msd digital 6 compared to the traditional msd 6al? (ek9t)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek9t »</TD></TR><TR><TD CLASS="quote">iv seen so many crap out its not even funny... when they do work though... they do work good</TD></TR></TABLE>
how do they crap out? mine works great
how do they crap out? mine works great
#10
Honda-Tech Member
Join Date: Oct 2000
Location: Zoo York
Posts: 4,534
Likes: 0
Received 0 Likes
on
0 Posts
Re: msd digital 6 compared to the traditional msd 6al? (Sp00n'd Supra)
they just stop working... as far as how... beats the hell out of me... if uv ever taken one apart ull know that there isnt exactly much to look at and try to figure out
iv had some work and are still working... but iv also seen alot crap out
iv had some work and are still working... but iv also seen alot crap out
#11
Honda-Tech Member
Join Date: Aug 2002
Location: JDM ricer land, CA
Posts: 2,901
Likes: 0
Received 0 Likes
on
0 Posts
Re: msd digital 6 compared to the traditional msd 6al? (ek9t)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek9t »</TD></TR><TR><TD CLASS="quote">they just stop working... </TD></TR></TABLE>
wow, interesting
wow, interesting
#14
Honda-Tech Member
Join Date: Oct 2002
Location: op, ks, usa
Posts: 1,441
Likes: 0
Received 0 Likes
on
0 Posts
Re: (TurboTegB18c)
I've had bad luck with MSD products.
From the 6A to the 6AL to the digital 6+.
I burnt a TON of blaster coils on my supercharged dakota.
I went thru 2- 6a boxes. They just quit working...
I wired the digital 6 + up and the 2step NEVER worked... that was fun.
and the 6al didn't work out the box... (a 6a but with "vibration extras")
From the 6A to the 6AL to the digital 6+.
I burnt a TON of blaster coils on my supercharged dakota.
I went thru 2- 6a boxes. They just quit working...
I wired the digital 6 + up and the 2step NEVER worked... that was fun.
and the 6al didn't work out the box... (a 6a but with "vibration extras")
Thread
Thread Starter
Forum
Replies
Last Post