more bad news.... pistons--head--son of a bi@#!
#1
Junior Member
Thread Starter
Join Date: Jan 2004
Location: 417, mo, usa
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
more bad news.... pistons--head--son of a bi@#!
so i pulled the head this weekend to install my new cometic hg only to find out that my #1 and #3 pistons were cracked and chipped ( je pistons) apperntly when my car jumped timing about 6 months ago the valves and pistons got a little close also my head has 4 cracks in it . luckily like most of you tuners i have a lot of extra parts from previous setups.i am thinking about putting in some (new)84mm endein rollerwave pistons 9.0.1 and adding total seal rings to them. also i am gonna have the block O-ringed while its out. throw on another one of my gsr heads and swap out the crower valvetrain. i am getting a little frustrated but thats what i get for not checking my timing so hopefully i can compete this year
setup:ls/vtec
darton sleeves
sc61 to4s -lovefab minime
blah blah blah
setup:ls/vtec
darton sleeves
sc61 to4s -lovefab minime
blah blah blah
#4
Honda-Tech Member
Re: more bad news.... pistons--head--son of a bi@#! (WREKONIZE V8 KLR)
damn...i remember one time my friend was adjusting his cam gear and forgot to tighten the bolts..he started the car and luckily i saw that his cam gear was doing all kinds of crazy ****. He actually got away without damaging anything
#5
Junior Member
Thread Starter
Join Date: Jan 2004
Location: 417, mo, usa
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Re: more bad news.... pistons--head--son of a bi@#! (Flr Power)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Flr Power »</TD></TR><TR><TD CLASS="quote">Just add more timing next time.</TD></TR></TABLE>
timing pw3nds me
timing pw3nds me
#6
Honda-Tech Member
Re: more bad news.... pistons--head--son of a bi@#! (SOHC_MShue)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue »</TD></TR><TR><TD CLASS="quote">damn...i remember one time my friend was adjusting his cam gear and forgot to tighten the bolts..he started the car and luckily i saw that his cam gear was doing all kinds of crazy ****. He actually got away without damaging anything </TD></TR></TABLE>
that would suck. i can just imagine revin her all the way out with the gear flappin back and forth..
that would suck. i can just imagine revin her all the way out with the gear flappin back and forth..
Thread
Thread Starter
Forum
Replies
Last Post