misfiring at 7400 rpm
05-05-2004, 08:55 AM
#1
Member
Thread Starter
Join Date: Dec 2003
Location: san diego, ca, USA
Posts: 3,398
Likes: 0
Received 0 Likes
on
0 Posts
misfiring at 7400 rpm
I dynoed my car last monday and I made only 302 whp 
, 225 lb/ft tourque , 14 psi at 7400 rpm because it's keep misfiring around 7000-7400 rpm, it should get more power because my redline is 8400 rpm. what do you think causing this??? The tuner said it's my MSD ignition but i want to make sure before buying a new one. Thanks in advance. Here's my set up BTW.
B18C T-sleeved by AEBS, Hondata 2B with P72, RC 750cc injectors, MSD 6A and coil, JG intake manifold, BBK 70mm throttle body, 9.0:1 Ross pistons, Eagle rods, Fully built head with crower springs, retainers and stainless stell valves, Full-Race Stage 4 turbo kit(T4/T67 turbo).
, 225 lb/ft tourque , 14 psi at 7400 rpm because it's keep misfiring around 7000-7400 rpm, it should get more power because my redline is 8400 rpm. what do you think causing this??? The tuner said it's my MSD ignition but i want to make sure before buying a new one. Thanks in advance. Here's my set up BTW.B18C T-sleeved by AEBS, Hondata 2B with P72, RC 750cc injectors, MSD 6A and coil, JG intake manifold, BBK 70mm throttle body, 9.0:1 Ross pistons, Eagle rods, Fully built head with crower springs, retainers and stainless stell valves, Full-Race Stage 4 turbo kit(T4/T67 turbo).
05-05-2004, 01:06 PM
#5
Honda-Tech Member
Re: misfiring at 7400 rpm (rollydc69)
05-05-2004, 01:13 PM
#6
Member
Thread Starter
Join Date: Dec 2003
Location: san diego, ca, USA
Posts: 3,398
Likes: 0
Received 0 Likes
on
0 Posts
Re: misfiring at 7400 rpm (ndogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ndogg »</TD></TR><TR><TD CLASS="quote">what plugs? whats the gap?</TD></TR></TABLE>
NGK BRK7E, .28 gap
NGK BRK7E, .28 gap
Thread
Thread Starter
Forum
Replies
Last Post