Mbc kicks ass's, installed and fixed a few things today
#1
Thread Starter
Join Date: Mar 2002
Location: Somewhere, NJ, USA
Posts: 915
Likes: 0
Received 0 Likes
on
0 Posts
Mbc kicks ***'s, installed and fixed a few things today
Well for one I turned my fully rubber oil return line into half stainless with only a few inches at the end I connected the rubber to fit on the fitting (tube) in the pan... its not beautiful but I don't think I'm leaking oil at the turbo anymore, but may need to make minor adjustments.... also went to a local muffler shop and had them modify my 90 degree elbow that I used as a dump tube to actually now fit on the manifold and make the wastegate on its side (so it doesn't rub on the hood anymore)..... and last but not least I installed my joe p mbc today...
I have the mbc adjusted nearly ALL the way out and its pretty steady at .45 bar which is what the spring is set at... but I don't seem to hear the wg nearly as much as I used to... mabye because its on an angle, I dunno.... but I definatly hit full boost quicker, joe p =
I have the mbc adjusted nearly ALL the way out and its pretty steady at .45 bar which is what the spring is set at... but I don't seem to hear the wg nearly as much as I used to... mabye because its on an angle, I dunno.... but I definatly hit full boost quicker, joe p =
#2
Join Date: Dec 2001
Location: Long Island, NY, USA
Posts: 2,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mbc kicks ***'s, installed and fixed a few things today (shadowdawn)
how long did it take to get the joe p mbc after u ordered it? i'm thinkin of ordering but i mite not be here in a week. thanks
-alan
-alan
Thread
Thread Starter
Forum
Replies
Last Post
bart2546
Honda Civic / Del Sol (1992 - 2000)
6
01-24-2007 03:09 AM