S2KP

opinions welcome :flamesuit on:










Modified by HatchAction at 12:41 AM 12/4/2004

rhdune16

Looks really nice man, but the welds near the port flange looks all messed up. Looks like you welded a lil too much. Anyways the design looks tight. Hope it works out and post pics of when it's done.

wHOAlly

whats the differnce in runner lengths between 1/4 and 2/3?

stockredej1

wow that looks badass. how long did it take you?

S2KP

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rhdune16 &raquo;</TD></TR><TR><TD CLASS="quote">Looks really nice man, but the welds near the port flange looks all messed up. Looks like you welded a lil too much. Anyways the design looks tight. Hope it works out and post pics of when it's done.</TD></TR></TABLE>

Thanks.....ehh i need a better camera...

S2KP

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sp00n’d Supra &raquo;</TD></TR><TR><TD CLASS="quote">whats the differnce in runner lengths between 1/4 and 2/3?</TD></TR></TABLE>

2 and 3 are longer since #3 always like to run hotter. I jus made them two runners longer...


thanks! total of almost 2 days..few hours here, few hours there..

pimpintyperintegra

do you think that the different runners are better than equal length or was it just easier to make that way?

very nice job, by the way.

S2KP

Thanks I wasn't going for the equal lenght or else I could've lengthened 1 and 4...

pimpintyperintegra

do you make manifolds normally because it looks like you did that one pretty easily.?

CivicEJ1

DJ_SaNdOz

It looks purdy, especially for DIY. I have the same question as everyone else though about the equal length VS non equal length issue...

S2KP

im not sure on the equal lenght issue. But if you really take a close look at the full race, sst, nekin style manifolds...they're really not true equal length. Runner 2 and 3 are longer....correct me if im wrong but thats what i see..


pimpinintegratyper, its the 2nd one i've made

H.A.R.T B18C1EG6

iTrader: (1)

0project dc2

iTrader: (1)

i like the fact that you barely had to cut any of those stupid weld els. i always got a problem with that

S2KP

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by project dc2 &raquo;</TD></TR><TR><TD CLASS="quote">i like the fact that you barely had to cut any of those stupid weld els. i always got a problem with that </TD></TR></TABLE>

I hear ya, they are tuff to cut. Only had to cut 2

alghafat424

nice man

Kwuaymaikrup

Looks great

rudebwoy

iTrader: (1)

if I wanted to make a manifold like that for myself, where would I get the piping? what size+thicknes?

USDM 4G VTEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rudebwoy &raquo;</TD></TR><TR><TD CLASS="quote">if I wanted to make a manifold like that for myself, where would I get the piping? what size+thicknes?</TD></TR></TABLE>
also what radius and what kind of steel the pipe is made off

nsxmatt

Does the hood shut?

AspectIndustries

Wow Wow! Looks very nice!

How easy was it to work and weld around those tight spaces? Any problems at all?

hondaguyef

Take the Flamesuit off!

That mani looks great! Any hood clearance issues?

Phil

ZexyAccord

Does your hood close?

JDMs1eeper

that manifold is hot... Imma PM you

mister Lin

It reminds me of the old ramhorns.

It's beautiful. Does it flow as well/good as it looks?