Tuned1

1992 Hatch LS Block B16 head, b16 cams 550cc's AEM EMS T3-T4 .63 Turbo Edlebrock I.M. , Holley 68mm T.B.

--- As Tested At ---
RACELINE...street performance-Dyno Tuning-custom fabrication
9069 Princeton-Glendale Rd
Hamilton, OH 45011
513-870-0999

--- Customer ---
Name : Brett K
Address :
,
Phone :

--- Vehicle ---
VIN :
Yr/Make/Model : 1993 / Honda / Civic CX

--- Test Data ---

Speed (RPM), Torque (Ft-Lbs), HP (HP)
2000.00, 0.00, 0.00
2100.00, 0.00, 0.00
2200.00, 0.00, 0.00
2300.00, 0.00, 0.00
2400.00, 0.00, 0.00
2500.00, 0.00, 0.00
2600.00, 0.00, 0.00
2700.00, 0.00, 0.00
2800.00, 23.03, 13.32
2900.00, 69.08, 39.97
3000.00, 115.13, 66.62
3100.00, 118.07, 70.30
3200.00, 121.00, 73.98
3300.00, 124.78, 78.53
3400.00, 129.40, 83.94
3500.00, 134.02, 89.36
3600.00, 138.21, 94.89
3700.00, 142.40, 100.42
3800.00, 147.39, 106.76
3900.00, 153.17, 113.90
4000.00, 158.96, 121.05
4100.00, 164.70, 128.70
4200.00, 170.44, 136.36
4300.00, 174.28, 142.68
4400.00, 176.22, 147.66
4500.00, 178.15, 152.64
4600.00, 178.31, 156.18
4700.00, 178.48, 159.72
4800.00, 178.67, 163.31
4900.00, 178.89, 166.96
5000.00, 179.10, 170.62
5100.00, 176.48, 171.36
5200.00, 173.86, 172.10
5300.00, 174.55, 176.23
5400.00, 178.55, 183.73
5500.00, 182.54, 191.24
5600.00, 187.07, 199.64
5700.00, 191.60, 208.04
5800.00, 195.64, 216.09
5900.00, 199.17, 223.81
6000.00, 202.71, 231.53
6100.00, 203.27, 236.05
6200.00, 203.83, 240.58
6300.00, 204.10, 244.79
6400.00, 204.09, 248.70
6500.00, 204.08, 252.60
6600.00, 204.11, 256.48
6700.00, 204.14, 260.35
6800.00, 204.51, 264.71
6900.00, 205.20, 269.54
7000.00, 205.89, 274.38
7100.00, 207.68, 280.81
7200.00, 209.48, 287.25
7300.00, 209.83, 291.69
7400.00, 208.74, 294.16
7500.00, 207.64, 296.62
7600.00, 207.91, 300.97
7700.00, 208.17, 305.33
7800.00, 207.85, 308.17
7900.00, 206.94, 309.51
8000.00, 206.03, 310.85
8100.00, 123.62, 186.51
8200.00, 41.21, 62.17
8300.00, 0.00, 0.00
8400.00, 0.00, 0.00
8500.00, 0.00, 0.00

zangiefisgod

what exhaust mani?

Mr. Softee

Glad you included your license plate

b_ron007

stock block?

Oyvind Ryeng

Do you have graphic curves of RPM vs. HP/TQ and more info on the setup?

dornon13

you could do it in Microsoft Excel

Oyvind Ryeng

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dornon13 &raquo;</TD></TR><TR><TD CLASS="quote">you could do it in Microsoft Excel</TD></TR></TABLE>
Nah, takes to much effort. Besides, I don't even have Excel.


EDIT: I suck at Photoshop:



Modified by Oyvind Ryeng at 9:27 PM 9/25/2004

Killer_B

fyi, 300hp is the baseline for the average b-series with a decent set up.


Modified by Killer_B at 6:34 PM 9/27/2004

herde1724

je pistons and i think eagle rods

turbo*s2k

good #'s

SiBirdie

81mm stock sleeves?

SiRkid

nice, but do I see a little bit of boost spike there?

herde1724

well this 300 hp was achieved on a mustang dyno when it was almost 90 in the dyno room later that week it was dynoed again at the same boost with fresh oil, new plugs, and plug wires, at 78 degrees and it did 326..........by my calculations that is nearly 350 on a dynojet

oh yea does ur normal everyday 300 hp bseries trap 118 on 9psi and run 11.80s

sly_106

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Oyvind Ryeng &raquo;</TD></TR><TR><TD CLASS="quote">Do you have graphic curves of RPM vs. HP/TQ and more info on the setup?</TD></TR></TABLE>

here ya go

Oyvind Ryeng

v2.0