LoveFab "Excaliber" 99% complete...
05-11-2003, 05:32 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
LoveFab "Excaliber" 99% complete...
Its almost done, just have to get my flanges tomorrow from the machine shop, and weld them on.
now the pics:
My girl had to get my Valentine Boxers in this pic
These will be sold for $600 once Im tooled up, because they are a bitch to make...
now the pics:
My girl had to get my Valentine Boxers in this pic
These will be sold for $600 once Im tooled up, because they are a bitch to make...
05-11-2003, 05:35 PM
#3
Member
Join Date: Nov 2001
Location: broke in the bay area, CA
Posts: 5,272
Likes: 0
Received 0 Likes
on
0 Posts
Re: LoveFab "Excaliber" 99% complete... (Tinker219)
Nice mani! Where do you get your flanges from??? I'm looking into making my own manifold but not too sure where I'm going to get some flanges from (d series), I know I'll need a couple because I always **** up.
05-11-2003, 05:36 PM
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: LoveFab "Excaliber" 99% complete... (0x64)
Im looking to put down as much as possible. I dont want to set any specific number, because thats just setting myself up for dissappointment. I think 400whp is VERY easily attainable though...
05-11-2003, 05:39 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: LoveFab "Excaliber" 99% complete... (sporkcrx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sporkcrx »</TD></TR><TR><TD CLASS="quote">Nice mani! Where do you get your flanges from??? I'm looking into making my own manifold but not too sure where I'm going to get some flanges from (d series), I know I'll need a couple because I always **** up.</TD></TR></TABLE>
what do you want made? I can make you one for pretty cheap...
This one was on my gfs car for 2 days before the car got smashed. Mani is still good though
what do you want made? I can make you one for pretty cheap...
This one was on my gfs car for 2 days before the car got smashed. Mani is still good though
Trending Topics
05-11-2003, 06:26 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: LoveFab "Excaliber" 99% complete... (Soon_2b_evil)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Soon_2b_evil »</TD></TR><TR><TD CLASS="quote">Thats SICK!!!!!!!!!!!!!!
But the only thing wrong with that is that its asking to be stolen.</TD></TR></TABLE>
no more-so than a big fat intercooler....
But the only thing wrong with that is that its asking to be stolen.</TD></TR></TABLE>
no more-so than a big fat intercooler....
05-11-2003, 06:39 PM
#11
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: LoveFab "Excaliber" 99% complete... (JonnyDanger)
not intended to be, but I will drive it daily I still have to design a scoop/filter system, but that part is up to the user whether or not one is used...
I still have to design a scoop/filter system, but that part is up to the user whether or not one is used...
05-11-2003, 09:49 PM
#17
Honda-Tech Member
Join Date: Jan 2001
Posts: 2,780
Likes: 0
Received 0 Likes
on
0 Posts
Re: LoveFab "Excaliber" 99% complete... (boostsohfast)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostsohfast »</TD></TR><TR><TD CLASS="quote">are you going to run an intercooler? if so, where will you mount it?</TD></TR></TABLE>
looks like a perfect candidate for a PWR air/water :D
looks like a perfect candidate for a PWR air/water :D
05-12-2003, 06:04 AM
#23
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Traverse City, Michigan, USA
Posts: 5,273
Likes: 0
Received 1 Like
on
1 Post
Re: (GOLDberg)
damn, you late-nighters got me last night...I was beat and went to bed about 11 eastern.
Ok here goes:
WAIC is the only way to go, unless you want hot air going into the turbo...
Thanx for the boxers compliment
I can make it so that the turbo turns the "traditional way" or diagnol, or whatever you want, but youll HAVE to use a half-radiator. You can use a FMIC this way though...
It will be braced in my traditional fashion, I just havent gotten around to it yet because my T4 flanges arent done.
Material is the traditional schedule 40 stainless steel. Almost 1/4 inch thick!
Ok here goes:
WAIC is the only way to go, unless you want hot air going into the turbo...
Thanx for the boxers compliment
I can make it so that the turbo turns the "traditional way" or diagnol, or whatever you want, but youll HAVE to use a half-radiator. You can use a FMIC this way though...
It will be braced in my traditional fashion, I just havent gotten around to it yet because my T4 flanges arent done.
Material is the traditional schedule 40 stainless steel. Almost 1/4 inch thick!
