looking for a basemap for a b16 9:1, 450cc, 2.5 bar, t3/t04e 57 trim, CROME
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2004
Location: Jacksonville, FL, usa
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
looking for a basemap for a b16 9:1, 450cc, 2.5 bar, t3/t04e 57 trim, CROME
to make a long story short, my friend lost my wideband and wont replace it, so i'm stuck running a basemap until I can get another.. so I was wondering if someone could set me up with a decent basemap for running this setup:
engine specs:
B16A bored .5mm over
wiseco 9:1 forged pistons
h-beam rods
arp head studs
valve work
gsr cams
springs & retainers
forced induction specs:
garrett t3/t04e 57 trim .60/.63
mitsu evo intercooler
tial 38mm wastegate
steel braided lines
2.5" downpipe
2.5" charge pipes
greddy bov
tuning:
dsm 450cc
p75 chipped ecu
2.5 bar motorola map sensor
moates datalogger
engine specs:
B16A bored .5mm over
wiseco 9:1 forged pistons
h-beam rods
arp head studs
valve work
gsr cams
springs & retainers
forced induction specs:
garrett t3/t04e 57 trim .60/.63
mitsu evo intercooler
tial 38mm wastegate
steel braided lines
2.5" downpipe
2.5" charge pipes
greddy bov
tuning:
dsm 450cc
p75 chipped ecu
2.5 bar motorola map sensor
moates datalogger
Thread
Thread Starter
Forum
Replies
Last Post