a little 4" dp cutout action
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Tampa, FL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
a little 4" dp cutout action
i finished up this downpipe a couple days ago. turned out pretty nice. i still have to do some work to the dump tube.
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Tampa, FL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: (R1ce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by R1ce »</TD></TR><TR><TD CLASS="quote">looks like the cut out from ebay, but i could be wrong
if it is, how good does it work? i been looking at that one</TD></TR></TABLE>
thats a 4" qtp unit. the shop i worked at just became a qtp dealer, so were probably going to start putting them on pretty much everything.
i was a little nervous about fitting all that crap in there, but suprisingly i had plenty of room.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DRIVENRacing »</TD></TR><TR><TD CLASS="quote">good stuff man, been folowing your threads on fab forum, good stuff... </TD></TR></TABLE>
thanks. i havn't been on honda-tech in a long time. my work may come out with a product line in the next year, so i'm trying to get back on the forums again.
if it is, how good does it work? i been looking at that one</TD></TR></TABLE>
thats a 4" qtp unit. the shop i worked at just became a qtp dealer, so were probably going to start putting them on pretty much everything.
i was a little nervous about fitting all that crap in there, but suprisingly i had plenty of room.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DRIVENRacing »</TD></TR><TR><TD CLASS="quote">good stuff man, been folowing your threads on fab forum, good stuff... </TD></TR></TABLE>
thanks. i havn't been on honda-tech in a long time. my work may come out with a product line in the next year, so i'm trying to get back on the forums again.
Trending Topics
#9
Honda-Tech Member
Join Date: Dec 2004
Location: Chicago area, us
Posts: 2,636
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdmef-9)
thats really nice. too bad its under the car, and cant be seen more often
If you dont mind asking what would something like that run. materials, fab-time, welding etc just for the DP and accesories
If you dont mind asking what would something like that run. materials, fab-time, welding etc just for the DP and accesories
#12
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Tampa, FL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: (xsi-t)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xsi-t »</TD></TR><TR><TD CLASS="quote">ive seen this DP in person and the pics do it no justice **** looks way ******* better. good **** mike.</TD></TR></TABLE>
thanks
somthing like this would be around $800~1000 with valve.
Modified by manifoldmiketyson at 7:06 PM 12/2/2007
thanks
somthing like this would be around $800~1000 with valve.
Modified by manifoldmiketyson at 7:06 PM 12/2/2007
#15
Honda-Tech Member
Thread Starter
Join Date: Feb 2004
Location: Tampa, FL
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Re: (quicksilver1689)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by quicksilver1689 »</TD></TR><TR><TD CLASS="quote">what size is the regular exhaust portion of the downpipe?</TD></TR></TABLE>
3" stainless. the customer wanted somthing that would be quiet, so i'm using a world sport muffler and a vibrant resonator. should sound pretty quiet without the cut out.
3" stainless. the customer wanted somthing that would be quiet, so i'm using a world sport muffler and a vibrant resonator. should sound pretty quiet without the cut out.
#16
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: a little 4" dp cutout action (manifoldmiketyson)
Like Xsi-T said. I'm not trying to be negative so dont take it that way Mike These pictures do nothing compared to looking at the work in person. Your work gets better with each month
#23
The Boot
Join Date: Dec 2001
Location: Arizona, US
Posts: 9,841
Likes: 0
Received 0 Likes
on
0 Posts
Re: a little 4" dp cutout action (blinx9900)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 »</TD></TR><TR><TD CLASS="quote">very very very nice work.</TD></TR></TABLE>i can only dream of something like that....******* sick!
#25
Honda-Tech Member
Join Date: Feb 2000
Location: Milwaukee, WI
Posts: 4,887
Likes: 0
Received 0 Likes
on
0 Posts
Re: a little 4" dp cutout action (manifoldmiketyson)
That 3" portion coming out of it looks so tiny compared to the rest of the DP!
I hope you can get some closed/open dyno numbers from this setup!
I hope you can get some closed/open dyno numbers from this setup!