just went to the track... timeslips inside
#1
Member
Thread Starter
Join Date: Sep 2002
Location: NorCAL, usa
Posts: 1,104
Likes: 0
Received 0 Likes
on
0 Posts
just went to the track... timeslips inside
this is my setup
ls vtec w/ t4 turbonetic turbo
81.5mm endyn rw piston
eagle rods
b16 vtec head
itr intake manifold
jg tb
greddy 720cc
aem fuel rail
sx fpr
revhard cast iron manifold
turbonetics t4 turbo
tial 40mm wastegate
3in down pipe
3in thermal exhaust
greddy type r bov
spearco IC 26x8x3
gsr tranny
act 4 puck xtreme
energy suspension inserts
prothane inserts
dtr traction bar
arp head studs
hondata 2b
12lb flywheel
koni yellow
gc coilovers 450f 400r
1st run
r/t .343
60ft 2.368
330ft 6.112
1/8 9.079
mph 84.62
1000 11.591
1/4 13.720
mph 106.58
2nd run
r/t .062
60ft 2.384
330ft 6.128
1/8 9.077
mph 82.37
1000 11.578
1/4 13.693
mph 107.68
3rd run
r/t .032
330ft 2.498
1/8 6.370
mph 84.31
1000 11.852
1/4 13.964
mph 108.31
this is @ about 80-85 degree, full interior dc2 w/subwoofer box. im guessing with me in it about 2700lbs or so. running on pretty bald tires @ 25psi. 13psi of boost. i was launching at about 4k-4,500 rpm... im gonna run it on slicks soon. i have bogarts wheel wit m/t slicks 24.5x7x13.... do u guys think its overkill? what do u guys think of my quarter mile time? i dynoed @ 285 to the wheels
ls vtec w/ t4 turbonetic turbo
81.5mm endyn rw piston
eagle rods
b16 vtec head
itr intake manifold
jg tb
greddy 720cc
aem fuel rail
sx fpr
revhard cast iron manifold
turbonetics t4 turbo
tial 40mm wastegate
3in down pipe
3in thermal exhaust
greddy type r bov
spearco IC 26x8x3
gsr tranny
act 4 puck xtreme
energy suspension inserts
prothane inserts
dtr traction bar
arp head studs
hondata 2b
12lb flywheel
koni yellow
gc coilovers 450f 400r
1st run
r/t .343
60ft 2.368
330ft 6.112
1/8 9.079
mph 84.62
1000 11.591
1/4 13.720
mph 106.58
2nd run
r/t .062
60ft 2.384
330ft 6.128
1/8 9.077
mph 82.37
1000 11.578
1/4 13.693
mph 107.68
3rd run
r/t .032
330ft 2.498
1/8 6.370
mph 84.31
1000 11.852
1/4 13.964
mph 108.31
this is @ about 80-85 degree, full interior dc2 w/subwoofer box. im guessing with me in it about 2700lbs or so. running on pretty bald tires @ 25psi. 13psi of boost. i was launching at about 4k-4,500 rpm... im gonna run it on slicks soon. i have bogarts wheel wit m/t slicks 24.5x7x13.... do u guys think its overkill? what do u guys think of my quarter mile time? i dynoed @ 285 to the wheels
#2
Member
Thread Starter
Join Date: Sep 2002
Location: NorCAL, usa
Posts: 1,104
Likes: 0
Received 0 Likes
on
0 Posts
Re: just went to the track... timeslips inside (tRaCeBuStAbUsTeR)
also i need to know what i need to run the bogarts wheels.....its 13 inches..... is there a alternative beside extended wheel studs? i dont have extended wheel studs rite now. and also do i need to get the wheel and slicks balanced?
#7
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2003
Location: San Jose, CA, USA
Posts: 1,704
Likes: 0
Received 0 Likes
on
0 Posts
Re: (95GSRTT)
at 12psi i made 332whp.........when i made about 250whp i ran a 13.5 on bald street tires...pulled 2.19 60ft.......with boost your should rip out of the hole
Trending Topics
#9
Join Date: Mar 2004
Location: Thetford, norfolk, England
Posts: 549
Likes: 0
Received 0 Likes
on
0 Posts
Re: just went to the track... timeslips inside (tRaCeBuStAbUsTeR)
I agree 60 foot times are pretty bad. Need more practice. Get your launching technique down and u will prolly make low 13's on street tires, and of course slicks definately deep into the 12's.
#11
Junior Member
Join Date: Sep 2003
Location: NorCal, CA
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
Re: (tRaCeBuStAbUsTeR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tRaCeBuStAbUsTeR »</TD></TR><TR><TD CLASS="quote">where did u get tuned at?</TD></TR></TABLE>
I basically have the same setup as you but only running 7psi... I hit a 12.1 boucing off the rev limiter in 3rd gear in a CX civic with full interior. My friend Ryan street-tuned the car for me... If your interested in tuning, I give you his number... he tunes at a place in San Jose.
I basically have the same setup as you but only running 7psi... I hit a 12.1 boucing off the rev limiter in 3rd gear in a CX civic with full interior. My friend Ryan street-tuned the car for me... If your interested in tuning, I give you his number... he tunes at a place in San Jose.
Thread
Thread Starter
Forum
Replies
Last Post