Just Tuned: B18C1, SC61.. 429 whp
#1
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Orlando, FL, USA
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
Just Tuned: B18C1, SC61.. 429 whp
B18C1 Stock sleeves
Endyn 9:1 81.5mm piston
Crower rods
Nuformz blockguard
hondata s100b
680cc injectors
Precision SC61
BP/Amaco 93 octane
2.5" Downpipe!
11 psi - 324 whp
15 psi - 367 whp
21 psi - 429 whp
This car is daily driven with a/c and power steering. We're really happy with the numbers!
Endyn 9:1 81.5mm piston
Crower rods
Nuformz blockguard
hondata s100b
680cc injectors
Precision SC61
BP/Amaco 93 octane
2.5" Downpipe!
11 psi - 324 whp
15 psi - 367 whp
21 psi - 429 whp
This car is daily driven with a/c and power steering. We're really happy with the numbers!
#3
Re: Just Tuned: B18C1, SC61.. 429 whp (Willis)
you got pics of the dyno charts? I want to see where the turbo is really working it. . Do you have a 3in exhuast? I building almost the same setup as your. But I'm debating to see if I should sleeve it or not. What kind of maifold are you using?
BTW... nice numbers
BTW... nice numbers
#4
Honda-Tech Member
Join Date: Dec 2001
Location: abitibi-temiscamingue, Quebec, Canada
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (Willis)
your not daily driving it on 21 psi dont you ???
good number though! when full boost is reached ?? ( rpm)
got pic's of your setup ?
Thx
keep up good work
Kranked
good number though! when full boost is reached ?? ( rpm)
got pic's of your setup ?
Thx
keep up good work
Kranked
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Orlando, FL, USA
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (98CTRCoupe)
the car has a 3" thermal exhaust, still running a 2.5" downpipe. The car pulls hard from 6000 to 9500! i would have taken it to 10k but we're still on stock valvetrain
#9
Honda-Tech Member
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (EpDarks)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EpDarks »</TD></TR><TR><TD CLASS="quote">I'd have my fingers crossed running 429 Hp w/ stock sleeves on 93 octane.</TD></TR></TABLE>
haha me too. :tick: :tick: :tick: ..................... I could see on race gas but 93 Numbers are sick though. What manifold used?
haha me too. :tick: :tick: :tick: ..................... I could see on race gas but 93 Numbers are sick though. What manifold used?
#11
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (Willis)
Post the dyno sheet. I would really like to see it. What exhaust manifold? Who did your tuning? Great numbers btw.
#12
Honda-Tech Member
Join Date: Jun 2001
Location: Canada City
Posts: 5,391
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (0x64)
your revving to 9500 on the stock vavletrain? youve got nuts.
that is some impressive **** though. post a dyno graph.
what manifold are you using?
that is some impressive **** though. post a dyno graph.
what manifold are you using?
#13
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Orlando, FL, USA
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (SiRkid)
I built and tuned the motor in this car. I'm not really too concerned running this much power on pump gas... the tune is real conservative, the plugs look perfect, and the car pulls smoother than ever.
#20
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (Willis)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Willis »</TD></TR><TR><TD CLASS="quote">valvetrain is stock integra type r.</TD></TR></TABLE>
ITR cams?
Awesome #'s
ITR cams?
Awesome #'s
#21
Honda-Tech Member
Thread Starter
Join Date: May 2001
Location: Orlando, FL, USA
Posts: 776
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (FredoSP)
im not sure they are either gsr or itr cams. Duty cycle on the 680s was about 90 at 9500 rpm at 43 psi fuel pressure. the pump is a walbro 255.
Hopefully I can convince Louis (owner of the car) to get the car out to the track next week and see what it can do.
Hopefully I can convince Louis (owner of the car) to get the car out to the track next week and see what it can do.
#23
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (Willis)
Why did it get so erratic from 7600rpm on? I would like to see what kind of times he can put down with that power too. Some Jim Fab or Z10 bars should be next in the list
#24
Honda-Tech Member
Join Date: May 2002
Location: Illanoise, USA
Posts: 3,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just Tuned: B18C1, SC61.. 429 whp (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">Why did it get so erratic from 7600rpm on?</TD></TR></TABLE>