Just some pics of my junkyard Turbo kit on my R
#1
Honda-Tech Member
Thread Starter
Join Date: May 2000
Location: Largo, Fl
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Just some pics of my junkyard Turbo kit on my R
http://www.we-todd-did-racing.com/wetoddimage.wtdr?i=wMTQyNzk2czQxM2RmZDMxeTU0MQ%3D% 3D</a> <A HREF="http://www.we-todd-did-racing.com/wetoddimage.wtdr?i=wMTQyNzU2czQxM2RmZDMxeTU0MQ%3D% 3D" TARGET="_blank">http://www.we-todd-did-racing.com/wetoddimage.wtdr?i=wMTQyNzU2czQxM2RmZDMxeTU0MQ%3D% 3D Starion Intercooler $24.
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D you can see some Home Depot stuff if you look hard enough. $34 BOV from NAPA
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D you can barely see my $64 turbo, I will get some pics without the homemade heat sheild. Dyno chart is not current.
Just thought I would post some pics, definately not finished but very happy as of now.
scott
guess I dont know how to post a pic...sorry
[Modified by scooter, 5:47 PM 10/9/2002]
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D you can see some Home Depot stuff if you look hard enough. $34 BOV from NAPA
http://www.we-todd-did-racing.com/we...MxeTU0MQ%3D%3D you can barely see my $64 turbo, I will get some pics without the homemade heat sheild. Dyno chart is not current.
Just thought I would post some pics, definately not finished but very happy as of now.
scott
guess I dont know how to post a pic...sorry
[Modified by scooter, 5:47 PM 10/9/2002]
#3
Honda-Tech Member
Thread Starter
Join Date: May 2000
Location: Largo, Fl
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some pics of my junkyard Turbo kit on my R (speedymon)
The guy who did all the install and fabrication on my car is John at http://www.LHTPerformance.net. He made to little brackets that attatch to one of the wastegate bolts and one of the bolts on the bracket for the power steering. Its just a sheet of stainless steel bent a little bit.
scott
scott
#7
Honda-Tech Member
Join Date: Apr 2002
Location: Tampa, Fl
Posts: 1,519
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some pics of my junkyard Turbo kit on my R (scooter)
Now you need a Monster Turbo( Big top end) , 3" thermal ( Big noise) , Run the waste gate open loop( More noise) Huge Intercooler ( No A/C and over heating) Then you know you are Turbo!
Trending Topics
#13
Honda-Tech Member
Re: Just some pics of my junkyard Turbo kit on my R (blufke)
WTF, did you say Junkyard turbo?
That thing looks hell of a lot better than my Greddy kit!
jB
That thing looks hell of a lot better than my Greddy kit!
jB
#15
Honda-Tech Member
Join Date: Feb 2002
Location: SC61ville, Brooklyn, NY/TX, USA
Posts: 10,836
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some pics of my junkyard Turbo kit on my R (PelowisheshewascoolTudo)
WTF, did you say Junkyard turbo?
That thing looks hell of a lot better than my Greddy kit!
jB
That thing looks hell of a lot better than my Greddy kit!
jB
#16
New User
Join Date: Nov 2000
Location: Tampa, FL, USA
Posts: 3,467
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some pics of my junkyard Turbo kit on my R (scooter)
ya ya Scooter's car is freaking nice! It took a LOT of prodding, but I think he's glad I planted the seed with him to go turbo after him getting frustrated with superchargers, n/a build ups gone wrong (please see why NOT to sleeve your block with Benson's), and general dissatisfaction with the JUN3 setup that would not make power. I think he's in love with his car again This car is every bit as nice in person as it is in pics! Props to Scooter and LHT
#17
Honda-Tech Member
Re: Just some pics of my junkyard Turbo kit on my R (FredoSP)
Yeah, but we got the internal WG (Not cool looking one sticking out the side); and I don't have a heat shield. Looks like I'm getting some rivets and sheetmetal tomorrow
jB
jB
#23
Re: Just some pics of my junkyard Turbo kit on my R (hondaswaper)
i dont know if i could do that to a white ITR............
#24
Honda-Tech Member
Thread Starter
Join Date: May 2000
Location: Largo, Fl
Posts: 1,278
Likes: 0
Received 0 Likes
on
0 Posts
Re: Just some pics of my junkyard Turbo kit on my R (ijjz)
Thanks for the compliments. Big to LHT Performance for the install.
I dont know if I can list everything without forgetting something but I will try.
T3 oil and water cooled Turbo off a Chrysler LeBaron .48ar exh. .48ar comp. 50trim wheel for $64 from local junkyard and about $300 to rebuild.
Manifold and Downpipe are SFP products for about $500 together with a little bit of a hookup.
Bosch BOV for $34 brand new from Napa Auto parts, works great.
Starion Intercooler from local junkyard for $24 and $5 for a can of black paint. $25 in welding work on it to get the pipes just right.
Intercooler piping was a total of about $35 in 2" steal J bends from local auto store.
Charge piping and intake turbo piping is pieces of used 2.5" AEM intake from I think a civic $free.
Filter is a new K&N for $25.
Oil line is a Nitros line from local auto shop for about $6.
Fitting for Oil line were about $10 from local auto shop.
Intercooler and charge pipe connectors are Ford F350 Turbo Diesel turbo hose from Discount auto parts for $7. None have even moved yet let alone blow off. Screw that stupid exspensive Turbonetics hose stuff
Hose clamps from local junkyard for $1.
misc. hoses and stuff $25.
Major nice work and hookup from John at LHT Performance...Priceless.
I think thats it, but I am sure I will remember stuff as we go.
scott
I dont know if I can list everything without forgetting something but I will try.
T3 oil and water cooled Turbo off a Chrysler LeBaron .48ar exh. .48ar comp. 50trim wheel for $64 from local junkyard and about $300 to rebuild.
Manifold and Downpipe are SFP products for about $500 together with a little bit of a hookup.
Bosch BOV for $34 brand new from Napa Auto parts, works great.
Starion Intercooler from local junkyard for $24 and $5 for a can of black paint. $25 in welding work on it to get the pipes just right.
Intercooler piping was a total of about $35 in 2" steal J bends from local auto store.
Charge piping and intake turbo piping is pieces of used 2.5" AEM intake from I think a civic $free.
Filter is a new K&N for $25.
Oil line is a Nitros line from local auto shop for about $6.
Fitting for Oil line were about $10 from local auto shop.
Intercooler and charge pipe connectors are Ford F350 Turbo Diesel turbo hose from Discount auto parts for $7. None have even moved yet let alone blow off. Screw that stupid exspensive Turbonetics hose stuff
Hose clamps from local junkyard for $1.
misc. hoses and stuff $25.
Major nice work and hookup from John at LHT Performance...Priceless.
I think thats it, but I am sure I will remember stuff as we go.
scott