Just got my ic,turbo and wastegate!!!!
#1
Just got my ic,turbo and wastegate!!!!
Thanks to the laskeys,1320development and the guy who sold me the red tial wastegate for cheap,my bad i forgot your user name,for the great deals.Now on with the show.Ohh yea sorry about jacking the PWR pic but tell me what you guys think,the endtanks look different and the inlet/outlet are in the middle,it could be better in the middle since the IC is 24x11x3,i wont have to mod the IC piping.
Its a tial 40mm wastegate and a garret t3 60-1.It has a 4inch compressor inlet and a 2.5 oulet.
Turbine specs:
.82 a/r turbine high flow 76 trim wheel
Compressor specs:
to4s .70 a/r housing w/ 60 trim wheel
[Modified by J2turbo21, 3:34 AM 2/15/2003]
Its a tial 40mm wastegate and a garret t3 60-1.It has a 4inch compressor inlet and a 2.5 oulet.
Turbine specs:
.82 a/r turbine high flow 76 trim wheel
Compressor specs:
to4s .70 a/r housing w/ 60 trim wheel
[Modified by J2turbo21, 3:34 AM 2/15/2003]
#2
Re: Just got my ic,turbo and wastegate!!!! (J2turbo21)
I had my PWR 11x 24 made with the rounded end tanks like yours and love it. I love the flow of the rounded ends and a little easier to install. I'm boosting a little over 20lbs and intake temps remain cool. What motor are you running? Bought mine from Mike Laskey
[Modified by dynoscreamer, 4:03 AM 2/15/2003]
[Modified by dynoscreamer, 4:03 AM 2/15/2003]
#3
Re: Just got my ic,turbo and wastegate!!!! (dynoscreamer)
Yea i was thinking that also,that it would flow better cause of the rounded endtanks.I got a gsr engine built top to bottom.
#5
Re: Just got my ic,turbo and wastegate!!!! (rOby)
HEHEH i dont know.I ordered these before I was thinking about going all motor.Im gonna continue on track until something big makes me go all motor.
Trending Topics
#8
Re: Just got my ic,turbo and wastegate!!!! (96b18c1vic(T))
I also got a tapped gsr oil pan with steel braid and the t fiiting for the oil inlet line.Come on someone buy it all.Im willing to take trades for all motor stuff and offers.Thanks.
[Modified by J2turbo21, 3:39 AM 2/28/2003]
[Modified by J2turbo21, 3:39 AM 2/28/2003]
Thread
Thread Starter
Forum
Replies
Last Post