just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Tejas
Posts: 6,351
Likes: 0
Received 0 Likes
on
0 Posts
just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1
https://honda-tech.com/zerothread?id=140862
so how hard would it be to bored out the combustion chamber on the head if I decided to go to 84mm sleeves ??? and how much cost should I be looking at ?
thanks
stan
ooh, what else will I need and might as well to do parts ?
I am thinking,
sleeve the block
bored out the combustion chamber on the head
9:1 endyn or JE piston
eagle rods
anything else I should do while the motor is off the car ?
for those of you who know me...yes, I will finally do my own clutch..
so how hard would it be to bored out the combustion chamber on the head if I decided to go to 84mm sleeves ??? and how much cost should I be looking at ?
thanks
stan
ooh, what else will I need and might as well to do parts ?
I am thinking,
sleeve the block
bored out the combustion chamber on the head
9:1 endyn or JE piston
eagle rods
anything else I should do while the motor is off the car ?
for those of you who know me...yes, I will finally do my own clutch..
#2
Trial User
Join Date: Feb 2000
Location: right near da beach, ....boy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (Flamenco-T)
not hard to spot face at all... by a head porter that is.. it might cost you like an extra hundred bucks
#4
Honda-Tech Member
Join Date: Jan 2000
Location: DFW, TX, USA
Posts: 2,374
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (Flamenco-T)
id get ferrea/portflow/ITR valvetrain with Ti retainers
endyn pistons for sure.
at least u got hookups around here thanks to art......
endyn pistons for sure.
at least u got hookups around here thanks to art......
Trending Topics
#11
Honda-Tech Member
Thread Starter
Join Date: Feb 2001
Location: Tejas
Posts: 6,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (TurboR481)
no, I dynoed at 6.5psi, but I drove around at 7.5-8psi, at a few occasions it even spiked to 9psi
my EBC can only go as low as 7.5psi
my EBC can only go as low as 7.5psi
#14
Trial User
Join Date: Feb 2000
Location: right near da beach, ....boy
Posts: 3,063
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (VaporTrail)
since no one has said it yet
get 8.8 piston and eagle rod
get 8.8 piston and eagle rod
#15
Honda-Tech Member
Join Date: Jun 2000
Location: NJ, USA
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (Flamenco-T)
sometimes we must take a step back to leap forward...or something in that context..
good luck with the rebuild
good luck with the rebuild
#17
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (Flamenco-T)
Well Adhi sorry about the blow out that really sucks, plus you didn't even boost for that long.....
I bet arter the build up your car is gona be strong as hell, and thats what its all about....
Well best of luck and try and have fun in your beater for a while...!!
Adi
#18
New User
Join Date: Aug 2001
Location: Los Angeles, CA, USA
Posts: 1,021
Likes: 0
Received 0 Likes
on
0 Posts
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (newgsr)
This message has been edited to protect the uninnocent and proven guitly.. No animals or small..children were harmed in the editing of this message but apparently feelings were.....
[Modified by Damon501, 3:45 PM 3/7/2002]
[Modified by Damon501, 3:45 PM 3/7/2002]
#19
Re: just blew my motor !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1 (Damon501)
This message has been edited to protect the uninnocent and proven guitly.. No animals or small..children were harmed in the editing of this message but apparently feelings were.....
[Modified by Damon501, 3:45 PM 3/7/2002]
[Modified by Damon501, 3:45 PM 3/7/2002]
art
Thread
Thread Starter
Forum
Replies
Last Post
B16Civic93
All Motor / Naturally Aspirated
7
10-22-2004 01:50 AM
zigs
All Motor / Naturally Aspirated
4
06-22-2003 01:31 PM