B16Civic93

wanted to know how much power you could efficently make with a 6 inch johnny race car intercooler?

Ls_dx

iTrader: (5)

also would like to know or any other input on JRC...

B16Civic93

bump

SC61HB

iTrader: (1)

I have made 315whp on my d series with it. It's been running for 3 years with no problems!

B16Civic93

thats good to know, i know people have made as much as 400whp on the 8 inch, i have the 6 inch from my old setup and when i put this one together i never replaced it, it's got a street tune on it now, and it runs pretty good but i think thats probably my biggest limiting factor in my setup right now, i wanna get about 400 to the wheels when i get it dyno tuned and didnt want to get there and have this be whats holding me back.

any more info is appreciated!

urbansi

i run the 8 inch daily at under 400whp. nice unit, i plan to run it past 450 this summer on e85 and a 75 shot.

dpetro1

what are the exact dimensions of the core? bar and plate or tube and fin?

B16Civic93

to be honest i dont know, i'd have to take my bumper off and measure, as far as bar and plate or tube and fin, i dont kknow that either, i bought this thing like....5 years maybe more ago i really dont remember and jrc no longer has a website or i'd just ask them this question and save all of this lol but bump for anyone ever using them and making good power

B16Civic93

bump

B16Civic93

anyone? i'd like to know for sure before spending close to 400 for an intercooler if i dont need it..

Outkast95LS

iTrader: (1)

I have the 6'' JRC intercooler, and have been making 346whp with no issues. I do plan on upgrading it to the 8'' though.

B16Drag

What are you IAT's?

B16Civic93

dont know my iat's dont have anyway to motor them... where do you plan on getting the 8 inch at? the website is no longer existant.

Outkast95LS

iTrader: (1)

I purchased the 8'' from a friend a while ago. Never had the time to put it on.

B16Civic93

oh.. if i had the 8 inch i wouldnt worry too much about getting 400whp out of it efficiently, i'm just afraid that i'm going to be past the limits of the intercooler and waste a trip to the dyno and the $... but if it wont be a problem to keep it i'll be able to save myself roughly $380 on the intercooler.