JE pistons (84mm) and B20Z shotpeened and balanced rods
#1
Member
Thread Starter
Join Date: Nov 2001
Location: 21,419 useless posts So. Cali., USA
Posts: 3,151
Likes: 0
Received 0 Likes
on
0 Posts
JE pistons (84mm) and B20Z shotpeened and balanced rods
I wanted to post this here so it did not get lost in the classifieds with the Altezza ads. I used these for my CRVTEC
setup. The pistons are 10:5.1 with a B16 head. They only have approximately 2000 miles on them. I cracked a cylinder wall on my stock B20Z block and to be safe I replaced that piston with a new one. The rings on that piston were visually the only thing compromised. They will come with all new rings and locks. The rods are stock B20Z and have been shotpeened and balanced by Benson's Performance Machine. As you can see by the pics they are in very good condition.
These pistons/rods withstood 12 p.s.i. of boost. I have purchased a whole B18C with and have no use for these.Make offer if you are seriously interested.
http://images.prosperpoint.com/images/555/28765-473.jpg http://images.prosperpoint.com/images/555/28765-472.jpg http://images.prosperpoint.com/images/555/28765-476.jpg http://images.prosperpoint.com/images/555/28765-470.jpg
John
ramacat@earthlink.net
[Modified by 1, 7:26 AM 2/4/2002]
setup. The pistons are 10:5.1 with a B16 head. They only have approximately 2000 miles on them. I cracked a cylinder wall on my stock B20Z block and to be safe I replaced that piston with a new one. The rings on that piston were visually the only thing compromised. They will come with all new rings and locks. The rods are stock B20Z and have been shotpeened and balanced by Benson's Performance Machine. As you can see by the pics they are in very good condition.
These pistons/rods withstood 12 p.s.i. of boost. I have purchased a whole B18C with and have no use for these.Make offer if you are seriously interested.
http://images.prosperpoint.com/images/555/28765-473.jpg http://images.prosperpoint.com/images/555/28765-472.jpg http://images.prosperpoint.com/images/555/28765-476.jpg http://images.prosperpoint.com/images/555/28765-470.jpg
John
ramacat@earthlink.net
[Modified by 1, 7:26 AM 2/4/2002]
#2
New User
Join Date: Jul 2001
Location: Tampa, FL, USA
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
Re: JE pistons (84mm) and B20Z shotpeened and balanced rods (1)
So...how much you want for em?? Since you have no use for em I'll gladly take them off your hands for free!! And I'll even pay for shipping!
[Modified by Project_Integra, 2:17 AM 2/4/2002]
[Modified by Project_Integra, 2:17 AM 2/4/2002]
Thread
Thread Starter
Forum
Replies
Last Post
pheonixb16aguy@hondaswap
All Motor / Naturally Aspirated
2
05-25-2005 04:27 PM