JDM DC 4-1 and JRSC
#1
Thread Starter
Join Date: Oct 2002
Location: Tucson, Az, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
JDM DC 4-1 and JRSC
Anyone have good results with this combo or is the Kamikaze the best header for a JRSC application? Do you know the best place to get a 2.5 race or free flow cat that will match up well with a 2.5 header and exhaust?
#2
Re: JDM DC 4-1 and JRSC (1strdtko)
mine worked fine...230whp @10psi running rich...but kamikaze i've heard will yield even more power. yes it's a good idea to get a hiflow cat.
#3
Thread Starter
Join Date: Oct 2002
Location: Tucson, Az, USA
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM DC 4-1 and JRSC (LOwrestling2001)
Where would I get the best deal on a Kamikaze header and do they still have a problem with matching up with the cats?
#4
Honda-Tech Member
iTrader: (1)
Re: JDM DC 4-1 and JRSC (1strdtko)
email ben@importparts.com, i got mine for $235 shipped. here's my dyno at 6psi with it.
[Modified by morepoop4u, 1:46 PM 12/6/2002]
[Modified by morepoop4u, 1:46 PM 12/6/2002]
#6
Honda-Tech Member
iTrader: (1)
Re: JDM DC 4-1 and JRSC (1strdtko)
well this is my whole setup; kami headers modified to a 3" collector https://honda-tech.com/zerothread?id=312216 , 3" cat, 3" exhaust, +2 on the exhaust cam, and hondata. this is not BEFORE AND AFTER with just the header. sorry for the confusion.
[Modified by morepoop4u, 11:46 PM 12/6/2002]
[Modified by morepoop4u, 11:48 PM 12/6/2002]
[Modified by morepoop4u, 11:46 PM 12/6/2002]
[Modified by morepoop4u, 11:48 PM 12/6/2002]
#7
Honda-Tech Member
Join Date: Feb 2000
Location: DC, Ca
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM DC 4-1 and JRSC (1strdtko)
I went with a 2.5" Kami and 2.5" resonated test-pipe.
Try to get a bracket welded on the collector to prevent leaks
Wrapped the header to aid in cooling the underhood temps.
Used a Dynomax 2.5" bullet muffler as a resonator and flanges from SMSP. Tig welded on by Sonny.
Try to get a bracket welded on the collector to prevent leaks
Wrapped the header to aid in cooling the underhood temps.
Used a Dynomax 2.5" bullet muffler as a resonator and flanges from SMSP. Tig welded on by Sonny.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
canuck-mx6
Acura Integra
6
02-27-2002 08:43 PM