JDM B18C Type R Build
#1
JDM B18C Type R Build
hey b20,
I am going to send my block to CNC werx to install there Cylinder Support System along with Bore, deck, jet wash, short-block assembly, polish crank and oring the block...
Since they are going to do the short block assembly other than the
1)Manley"H" BEAM STEEL CONNECTING RODS
2) CP Pistons (10-1 CR-Maybe)...Opinion on Compression ratio greatly appreciated
...is there anything else i will need to upgrade my short block for boost
(450- 500hp)
I am going to send my block to CNC werx to install there Cylinder Support System along with Bore, deck, jet wash, short-block assembly, polish crank and oring the block...
Since they are going to do the short block assembly other than the
1)Manley"H" BEAM STEEL CONNECTING RODS
2) CP Pistons (10-1 CR-Maybe)...Opinion on Compression ratio greatly appreciated
...is there anything else i will need to upgrade my short block for boost
(450- 500hp)
#6
Trending Topics
#8
I never narc'd on nobody!
iTrader: (1)
Re: JDM B18C Type R Build
You're in the right place here. B20V is a bunch of mouthbreathing fucktards. No, seriously. A couple of us have accounts there when we want to laugh at their stupidity. B20V is filled with more clownfaced idiots than a VW Bug at a Barnum and Bailey event.
#9
Re: JDM B18C Type R Build
LMAO! So I've heard.
#12
Honda-Tech Member
Join Date: Oct 2006
Location: Covered in Tattoos, NYC
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Re: JDM B18C Type R Build
Thread
Thread Starter
Forum
Replies
Last Post
Max500
Forced Induction
9
03-18-2013 07:10 PM
rtnlsltn
Classifieds: Forced Induction
2
12-23-2006 05:23 PM