j&s safeguard keeps on reading knock
#1
New User
Thread Starter
Join Date: Aug 2001
Location: Baton Rouge, LA, usa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
j&s safeguard keeps on reading knock
ok.. i just installed the safeguard v2 and the dual monitor on my prelude. it keeps on reading knock on the v2 but will not show anything on the monitor. the a/f shows on the monitor. anyone know wat the problem might be?
on j&s website, they said that the v2 has a switch for us to select from 4, 6 or 8 cylinder.. i don't see anything on the safeguard v2 i got. am i missing anything here?
on j&s website, they said that the v2 has a switch for us to select from 4, 6 or 8 cylinder.. i don't see anything on the safeguard v2 i got. am i missing anything here?
#2
What is this crap?
Re: j&s safeguard keeps on reading knock (fiyaboi)
i think the safeguard is shipped programmed for 4 6 or 8, there is no switch.
i had to replace the cable from the J&S to the monitor with one from radio shack cause the one they sent had an intermittent open in one of the plugs.
i had to replace the cable from the J&S to the monitor with one from radio shack cause the one they sent had an intermittent open in one of the plugs.
#3
New User
Thread Starter
Join Date: Aug 2001
Location: Baton Rouge, LA, usa
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: j&s safeguard keeps on reading knock (fiyaboi)
anyone knows anything abouy the safeguard v2 and dual monitor?
or has anyone installed one of these units?
or maybe i just put the blue wire to the wrong ecu wires.. knock wire should be d6 on the ecu.
or has anyone installed one of these units?
or maybe i just put the blue wire to the wrong ecu wires.. knock wire should be d6 on the ecu.
Thread
Thread Starter
Forum
Replies
Last Post
BILLisCHILL
Honda Civic / Del Sol (1992 - 2000)
4
05-08-2008 06:40 PM