Interest for PPG/Bullhead Straightcut Syncroed H22 Gearset
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Mar 2008
Location: Blah Blah Blah, wa, Erf
Posts: 2,938
Likes: 0
Received 7 Likes
on
6 Posts
Interest for PPG/Bullhead Straightcut Syncroed H22 Gearset
SO as the new PPG/Bullhead H Dogbox is actually going into production (The Bs are already out as are the Ks, and the H will be delivered soon to those that bought in).... It is now time for us that would rather stick to a syncroed variant.
I have been on the phone with Eric at Bullhead in regards to putting together a Syncroed 1-4 set just like they did for the K guys (pictured below). It would use an OEM fifth gear, and all other parts would be OEM compatable (Syncros, sliders, selectors, collars, countershaft/FD etc.). As per him...It is totally doable and as I have had LOTS of problems with everything Ive tried, I have faith this might FINALLY fix my breakage issues. Being my car is a true streetcar, I want to keep a syncroed set. Bullhead Gears is local to me, and it will be nice to have the support of a local company to actually SHOW them whats going wrong should ANYTHING happen. If you have seen the quality of the released B and K stuff, you know that it is seriously beefy.
Projected cost is around 3 Grand... 1500 deposit (That will be sent directly to bullhead gears).
Here is a shot of the K set which is JUST like what we'd be getting.
https://honda-tech.com/forums/transmission-drivetrain-127/interest-ppg-bullhead-straightcut-syncroed-h22-gearset-2469041/
Please if you are interested Let us know there SO I can stay up on the updating of the thread!!!
.
.
.
.
.
.
.
.
.
I have been on the phone with Eric at Bullhead in regards to putting together a Syncroed 1-4 set just like they did for the K guys (pictured below). It would use an OEM fifth gear, and all other parts would be OEM compatable (Syncros, sliders, selectors, collars, countershaft/FD etc.). As per him...It is totally doable and as I have had LOTS of problems with everything Ive tried, I have faith this might FINALLY fix my breakage issues. Being my car is a true streetcar, I want to keep a syncroed set. Bullhead Gears is local to me, and it will be nice to have the support of a local company to actually SHOW them whats going wrong should ANYTHING happen. If you have seen the quality of the released B and K stuff, you know that it is seriously beefy.
Projected cost is around 3 Grand... 1500 deposit (That will be sent directly to bullhead gears).
Here is a shot of the K set which is JUST like what we'd be getting.
https://honda-tech.com/forums/transmission-drivetrain-127/interest-ppg-bullhead-straightcut-syncroed-h22-gearset-2469041/
Please if you are interested Let us know there SO I can stay up on the updating of the thread!!!
.
.
.
.
.
.
.
.
.
Last edited by extralargenog; 01-09-2009 at 02:22 PM.
#2
Honda-Tech Member
Join Date: Apr 2003
Location: Bitburg Germany
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Re: Interest for PPG/Bullhead Straightcut Syncroed H22 Gearset
Good stuff , it's good to see company's putting out products for the h-series . Now all I need to do is save up some loot
Thread
Thread Starter
Forum
Replies
Last Post
extralargenog
Transmission & Drivetrain
4
01-17-2009 04:12 AM
extralargenog
All Motor / Naturally Aspirated
5
01-16-2009 10:53 AM
extralargenog
Drag Racing
1
01-12-2009 03:07 PM