Intercooler fitment(EG)...Searched
#1
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Somewhere In, MD, USA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler fitment(EG)...Searched
My hatch-93 si w/gsr swap- is currently in another state, and i have an intercooler-not too sure about the fitment area. The exact dimensions are- 28.25 x 7 x 3.0. I'm also not too sure about the bumper support, but the mounting bungs on the top of the intercooler are 1/2 in. tall,bringing the total hight to 7.5in. The thing I'm worried about most is, the fitment of the intercooler behind my oem bumper? I don't want to cut and drill too many times before it fits right behind the grill.
Any input greatly appreciated.
-for those who look and never post...
Modified by Rbehne2 at 10:35 PM 1/31/2007
Any input greatly appreciated.
-for those who look and never post...
Modified by Rbehne2 at 10:35 PM 1/31/2007
#2
Honda-Tech Member
Re: Intercooler fitment(EG)...Searched (Rbehne2)
this may help a little for reference and size.
https://honda-tech.com/zerothread/1881652
https://honda-tech.com/zerothread/1881652
#4
Junior Member
Thread Starter
Join Date: Jan 2006
Location: Somewhere In, MD, USA
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Re: Intercooler fitment(EG)...Searched (mike1114)
Thanx for the help guys , I think I'll be going with a larger size for my setup, after doing some extended research...
You may see this intercooler in the sale thread whithin the next few weeks...
You may see this intercooler in the sale thread whithin the next few weeks...
Thread
Thread Starter
Forum
Replies
Last Post