I started in on my pre-turbo install, I have some questons for the people with inline pro headgasket
#1
On Fire!
Thread Starter
I started in on my pre-turbo install, I have some questons for the people with inline pro headgasket
I finally got some time this last weekend to start in on my car and getting it ready for the turbo. I'm installing a new waterpump, timing belt, accessorie belts, inline pro headgasket and 440's...
I pulled the head off on saturday and everything looks pritty good accept for the inside of the intake manifold where its black as dirt but I will clean it up along with other things that need cleaning on that thing.
But to get to the point here I have arp headstuds and a inline pro head gasket now both of those companies say to either torq the studs a little harder or soften them up a little bit, can anybody tell me what they torqued their studs to with this same setup... I know this is a pritty volitle point and don't wanna mess up so thats why I came here....
Adi
#2
On Fire!
Thread Starter
Re: I started in on my pre-turbo install, I have some questons for the people with inline pro headga
C'mon guys somebody has to know something about this, Jinxproof somebody.....
Thanks,
Adi
#4
On Fire!
Thread Starter
Re: I started in on my pre-turbo install, I have some questons for the people with inline pro headga
call inline and talk with john lee or stan......703-644-1788
Adi
Thread
Thread Starter
Forum
Replies
Last Post