I call bull-shit... 600hp @30psi (on 91 octane DSM)
#1
Honda-Tech Member
Thread Starter
I call bull-****... 600hp @30psi (on 91 octane DSM)
These retards banned me from the forum because I questioned the feasability of this...
600hp...@ 30psi...on 91 with a 12.5:1 AFR...= yeah right.
http://www.rmdsm.org/forums/showthread.php?t=3989
This kid has never shown pictures of this graph, or the car. I have seen the car in person at the track, but he never ran it, and never opened the hood. The car looks like a POS in person (worst orange peel paint job I've ever seen).
He sold my freind some "680cc" injectors that turned out to be 980ccs.
Anyone want to comment?
I find it amazing that no one on that forum questions his setup. I guess its because everyone who does gets banned
me - Hi, I saw your post on rmdsm...
him - which one?
me - the one about making 600hp on 91
me - do you have a graph?
him - oh
me - Do I have the dyno sheet? Yes
me - could you show me?
him - I've not scanned it in.
me - how much timing were you running @ full boost?
him - ~6-7*BTDC
me - naa not base timing...I mean full advance @ 30psi?
him - AEM doesn't read base
him - that is my actual timing
me - huh
him - I don't run a stock ECU
me - 7degrees?
him: yes approximately 7 degrees
him: I could bump it to 15 or so safely I think, but I'd rather keep timing low
me - ahh
Modified by Bryson at 4:33 PM 11/3/2004
600hp...@ 30psi...on 91 with a 12.5:1 AFR...= yeah right.
http://www.rmdsm.org/forums/showthread.php?t=3989
This kid has never shown pictures of this graph, or the car. I have seen the car in person at the track, but he never ran it, and never opened the hood. The car looks like a POS in person (worst orange peel paint job I've ever seen).
He sold my freind some "680cc" injectors that turned out to be 980ccs.
Anyone want to comment?
I find it amazing that no one on that forum questions his setup. I guess its because everyone who does gets banned
me - Hi, I saw your post on rmdsm...
him - which one?
me - the one about making 600hp on 91
me - do you have a graph?
him - oh
me - Do I have the dyno sheet? Yes
me - could you show me?
him - I've not scanned it in.
me - how much timing were you running @ full boost?
him - ~6-7*BTDC
me - naa not base timing...I mean full advance @ 30psi?
him - AEM doesn't read base
him - that is my actual timing
me - huh
him - I don't run a stock ECU
me - 7degrees?
him: yes approximately 7 degrees
him: I could bump it to 15 or so safely I think, but I'd rather keep timing low
me - ahh
Modified by Bryson at 4:33 PM 11/3/2004
#4
Honda-Tech Member
Thread Starter
Re: I call bull-****... 600hp @30psi (ron@smp)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ron@smp »</TD></TR><TR><TD CLASS="quote">It's not BS. Others have made over 500whp on pump with low timing also.</TD></TR></TABLE>
600...?
I've never seen a DSM make over 500 on pump, and @ 7 degrees? haha...yeah right.
600...?
I've never seen a DSM make over 500 on pump, and @ 7 degrees? haha...yeah right.