how thin is too thin (exhaust manifold flange?)
10-04-2004, 06:06 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: West Palm, FL
Posts: 721
Likes: 0
Received 0 Likes
on
0 Posts
how thin is too thin (exhaust manifold flange?)
big headaches right now...
i bought a turbo manifold from a fellow TI'er.
the flange mounting to the block is bowed, not warped like a potato chip. anyhow the flange is 3/8" thick and the bow is about 1/8 at the middle (around the inner two runners).
I'm gonna have it milled. so i wanna so low thin can it be; such that it wont cause more warping?
this manifold has been a headache... when i first got it (used)... it was crack at the welds... the guy offered to reweld it, which was cool... but i found a local guy that did it for cheap... (not wanting to fuss with shipping and all)... then i find this warping... the other thing one of the threaded holes is stripped.
... and lastly... the wg doesn't completely cover my 38mm tial wg. I've got a leak there too...
anyway... thanks for any help...
kham
i bought a turbo manifold from a fellow TI'er.
the flange mounting to the block is bowed, not warped like a potato chip. anyhow the flange is 3/8" thick and the bow is about 1/8 at the middle (around the inner two runners).
I'm gonna have it milled. so i wanna so low thin can it be; such that it wont cause more warping?
this manifold has been a headache... when i first got it (used)... it was crack at the welds... the guy offered to reweld it, which was cool... but i found a local guy that did it for cheap... (not wanting to fuss with shipping and all)... then i find this warping... the other thing one of the threaded holes is stripped.
... and lastly... the wg doesn't completely cover my 38mm tial wg. I've got a leak there too... anyway... thanks for any help...
kham
Thread
Thread Starter
Forum
Replies
Last Post
