how much you pay to rebuild your eng for turbo?
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2002
Location: Tampa, FL
Posts: 875
Likes: 0
Received 0 Likes
on
0 Posts
how much you pay to rebuild your eng for turbo?
how much around did you pay for the parts to rebuild your eng? also can i get more info on a block guard and how many of you actually use it? thanks!
#2
Re: how much you pay to rebuild your eng for turbo? (DjFreeze)
Psitons approx $450-$550, Rods Eagle Rods $350, Crower $650, Gaskets and bearings about $300(approx) No block guard, GE Block $845 shipped there and back and bored and honed with free sunking sleeves more money to spend on that(Sorry) Oil, Filter, Coolant etc etc, Assenbly lube, I got headwork done. I t all depends to what extent you go to. A simple rebuild rod sna d pitons and gaskets can be $1500 with machine work, just depends. I don't like block guards sorry.
#4
Re: how much you pay to rebuild your eng for turbo? (hybostien)
so far:
10 bux for ls rods
free machine work on the rods (friend)
200 to machine crank and bearings
70 oil pump and rear main oil seal
block was free (d16 with no head)
left to do:
pistons 450
clutch 250 with throw out bearing
head gasket $?
mics $?
10 bux for ls rods
free machine work on the rods (friend)
200 to machine crank and bearings
70 oil pump and rear main oil seal
block was free (d16 with no head)
left to do:
pistons 450
clutch 250 with throw out bearing
head gasket $?
mics $?
#5
Re: how much you pay to rebuild your eng for turbo? (hybostien)
Yeah yeah yeah Dave just like you oh LS/VTEC Master! You were making good power and Awesomes times, stock blcok aftermarket pistons and rods Sleeves no likey your pressure! Get some Dartons and get Seth to do it.
#6
Re: how much you pay to rebuild your eng for turbo? (Boostfed)
boostfed : you old setup... was that on stock sleeves?... and what do you think is a good decision point on whether or not to sleeve the block?... lemme know... thanks...
#7
Honda-Tech Member
Join Date: Mar 2001
Location: Ft. Worth, TX
Posts: 3,650
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much you pay to rebuild your eng for turbo? (1.8T_EG)
Ehhhhh he's going to tell you not to have GE doing your sleeving since his sleeves wound up in his oil pan or something
Thread
Thread Starter
Forum
Replies
Last Post
d16dcoe45
All Motor / Naturally Aspirated
9
10-23-2006 07:45 AM