How much YOU made with NIPPON vitaras?
#1
Honda-Tech Member
Thread Starter
How much YOU made with NIPPON vitaras?
hey,
question for the guys that are using the nippon denso vitaras, how much hp are you making?
i'v had bad experience while tuning an engine with Nippons, but i cant blame myself , it was a poorly built engine,
thanks
question for the guys that are using the nippon denso vitaras, how much hp are you making?
i'v had bad experience while tuning an engine with Nippons, but i cant blame myself , it was a poorly built engine,
thanks
#2
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
Avoid nippons, go with ycp
My buddy and I built our motors side by side. Me- ycp, him-nippons... He's going to the dyno on a gt30 mid-Feb so ill post u on that but fyi, his motor has same clearances.0038 and his Nippons are much noisier
My buddy and I built our motors side by side. Me- ycp, him-nippons... He's going to the dyno on a gt30 mid-Feb so ill post u on that but fyi, his motor has same clearances.0038 and his Nippons are much noisier
Last edited by ek9_beast; 01-25-2015 at 12:29 PM.
#3
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
Just got off the phone with the buddy I speak of. He's street tuned the car himself to 23-25psi and is going to a $100 FWD dyno session special on Thursday at a local shop so ill get the numbers to you then. Then again in mid-February when he's on a dyno tune on s300.
#5
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
Nippons can hold 250whp for sure buddy as long as it was properly put together. My buddy is shooting for 330whp on Nippons Thursday on a mustang
#6
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
Just got the word from him. 317whp @ 22.5psi on a .57trim Godspeed turbo on eagle/nippon d16. This on a mustang dyno. So about 339whp on a dynojet. Not bad for a stock head.
Trending Topics
#8
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
I'm going to stop by his house after work to see the power curve. I'm curious as hell because we built these motors side by side in my garage just I'm running ycp vitaras and a built head/ BC stg 2 cam running exact specs and turbo. Doing a Nippon/ycp build comparison noise wise and how long they stay together but I'm waiting for a dyno tune next week vs his street tune.
#12
Honda-Tech Member
Join Date: Feb 2008
Location: central valley
Posts: 2,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
I wouldn't know . I mean viteras are super low compression . But from what I've read is that single cams should make better torque then a b series at 300whp . I can be wrong
#13
Honda-Tech Member
Join Date: Dec 2014
Location: Baltimore, MD
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
Re: How much YOU made with NIPPON vitaras?
Also, I hope these results helped the op gain confidence in the Nippons.
Thread
Thread Starter
Forum
Replies
Last Post