94lsboost

Ok so the kit is for a stock 94 LS and includes: Lovefab sst manifold, k26 turbo, delta wastegate w/5-7 psi springs, greddy type S BOV, Vortech FMU, Ford Probe intercooler, 2" piping...

The LS has a GSR tranny-hydro and is otherwise stock....can you give me estimates of power/tq, and quarter mile time possibilities...I realize there are many other factors, but you guys are knowledgeable so please just give me educated guesses.

RedTegLS

2" exaust piping or intercooler piping? at 5 lbs......im gonna call it 209.42 HP.

94lsboost

I am sorry for missing some parts, I am gonna run 7 PSI, and 2" intercooler piping....undecided on exhaust piping

94lsboost

Oh, and I am really interested in keeping this Low budget, so would the stock fuel with the vortech FMU that comes be ok? If not what should i change? Or how advantageous would it be to tune with Uberdata on 450cc's....I am hoping the vortech FMU will be fine b/c it's cheaper

94lsboost

Another option that might be better than the FMU and still relatively cheap would be a walbro 225 fuel pump, dsm 450's, and buying a chip from someone for 7 psi from Uberdata or hondata, I know each setup is different, but wouldn't a programmed chip be better than a FMU? even if it was just a base chip for my car at 7 psi? not fully tuned to my specifics

94lsboost

anyone? power/tq estimates, 1/4 times? and fuel mgmt...as I said it comes with vortec FMU...I plan on running 7 psi, so should i run stock fuel system with the vortec, or the vortec with dsm 450's and a walbro pump, or uberdata and the 450's and pump, or just get someone to sell me a 7psi chip that was made using hondata or uberdata....even tho it wouldn't be perfect, it should be as good/better than the fmu....


i need advice!

94lsboost

someone please humor me w/estimates. I am thinking it should put down about 210/180 with an eprom set by Uberdata. What kind of quarter mile times might I expect (gsr tranny also)....?

RedTegLS

I will continue to humor you but I think this might be a dead topic. For the $100 shipped that a walbro will cost you why not buy it? Contact PHiZ if you want a burnt ECU. Cool dude w/ ultra fast shipping! I recommend tuning though!

94lsboost

Haha yes it looks to be dead. I was really hoping for some power estimates. I contacted him and it was a little too expensive, I can do it myself for like half that price, maybe less. But I mean you have to factor in his time, and shipping as well. I guess I'll just shoot for 210ish.