theh22powa

im gonna turbo my stock block h2b setup and was wondering wat kind of hp #s people were seeing from this kind of setup

2000CTRSi

Weak ring lands. 280 ish whp is around the neighborhood

theh22powa

i was thinking atleast 350

sanman000719

i was thinking there is a q and a on here for a reason, and you are about to get hammered asking them questions lol

turbohatch96y7

iTrader: (15)

If thats what your thinking I dont know how you could be wrong.. I was thinking at least 650

DraginX

I have seen a stock h22 with arp head studs go over 500.

DraginX

And it was beat to begin with and it's seen a hard life and is still kicking after a few years now.

theh22powa

thanks for the replies....

Turbo-LS

iTrader: (4)

Stock sleeves on an H block are crap, when you really start turning up the power they dont like it. they will probably make what a vtec b series can make 300-350 with a good tune but expect it to burn alot of oil and have a bit of crankcase pressure

jdmh2bcivic

I was wondering the same thing with turbos h2b's they say that the rings are weak but as a daily driver i say keep it on 7psi make good power n last long but has to be a good turbo kit and a good tune..

theh22powa

thanks yea i was thinking 7 or 8 psi should make around 350...its a stock block with a RLZ HEAD...using a borg warner s366