how to measure my slug
#1
Thread Starter
Join Date: May 2002
Location: Jinx Proof Brown Noser.
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Fat guy in a little suit?
I changed the title cuz I wasn't catching any flies. (sorry for misrepresentation)
The real reason for this post is that I'm not exactly sure of what turbo I have before me. I know that trim size is the size of your wheels in MM but i'm still having trouble with this. someone help.
FACTS:
T3 turbine - center section
compressor housing says "AR .60 garret air research T04"
compressor wheel when Mic'd measured
O.D. 2.753" (70mm)
SMALL O.D. / INNER BLADES 2.032 (51.6mm)
THERE ARE 8 BLADES!?!?
exhaust wheel
O.D. 2.545 (64.64mm)
SMALL O.D. / INNER BLADES 2.21 (56mm)
11 BLADES.
EXACTLY WHAT THE **** TURBO IS THIS?!?!
E or B family?
I'll post the MM conversion in a bit.
Thanx to whomever replies to this I know it's been beaten to def.
yeah muthafuckas!!!
This turbo is a T3/T04B
Compressor is a 54 trim
With a Stage 1 exhaust wheel
Trim calculator formula (compressor wheel) = (S.D.^2) / (L.D.^2)
Small diameter squared divided by large diameter squared.
BOOOYEAH!!!
[Modified by T-sohctec, 4:26 PM 3/22/2003]
[Modified by T-sohctec, 4:27 PM 3/22/2003]
[Modified by T-sohctec, 4:59 PM 3/22/2003]
[Modified by T-sohctec, 5:38 PM 3/27/2003]
The real reason for this post is that I'm not exactly sure of what turbo I have before me. I know that trim size is the size of your wheels in MM but i'm still having trouble with this. someone help.
FACTS:
T3 turbine - center section
compressor housing says "AR .60 garret air research T04"
compressor wheel when Mic'd measured
O.D. 2.753" (70mm)
SMALL O.D. / INNER BLADES 2.032 (51.6mm)
THERE ARE 8 BLADES!?!?
exhaust wheel
O.D. 2.545 (64.64mm)
SMALL O.D. / INNER BLADES 2.21 (56mm)
11 BLADES.
EXACTLY WHAT THE **** TURBO IS THIS?!?!
E or B family?
I'll post the MM conversion in a bit.
Thanx to whomever replies to this I know it's been beaten to def.
yeah muthafuckas!!!
This turbo is a T3/T04B
Compressor is a 54 trim
With a Stage 1 exhaust wheel
Trim calculator formula (compressor wheel) = (S.D.^2) / (L.D.^2)
Small diameter squared divided by large diameter squared.
BOOOYEAH!!!
[Modified by T-sohctec, 4:26 PM 3/22/2003]
[Modified by T-sohctec, 4:27 PM 3/22/2003]
[Modified by T-sohctec, 4:59 PM 3/22/2003]
[Modified by T-sohctec, 5:38 PM 3/27/2003]
#4
Thread Starter
Join Date: May 2002
Location: Jinx Proof Brown Noser.
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Re: Fat guy in a little suit? (AVATAR)
thanx for bothering to reply.
as for how many blades it's 8 just like it's listed with all the other fathomable specs on a turbo.
as for how many blades it's 8 just like it's listed with all the other fathomable specs on a turbo.
Thread
Thread Starter
Forum
Replies
Last Post
dustinz_em1
Forced Induction
7
11-25-2007 05:41 AM