How do you make a $80,000 Type-R
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
How do you make a $80,000 Type-R
From Feb issue of Sport Compact.
Is this guy really dumped $60,000 on the $20,000 Teg?
???
Internal Mod
-84mm JE forged 9.0:1 pistons with high-tension rings
-Manley forged rods
-DSarton sleeves
-ProDrive oil pump gear
-BASZ ported head with 5-angle valve job
-Ferrea valves
-skunk2 springs and retainers
-ARP stud kit
External Mod
-Drag3 intercooler piping
-JG Edelbrock intake manifold
-Comptech fuel pressure regulator
- -6fuel lines
-Drag exhaust mani and 2.5" downpipe
-BASZ custon T3/T04 63trim turbo
-Tial wastegate
-HKS ssqu BF valve
-3" Greddy extreme 2 exhaust
-Greddy oil cooler
Engine Management Mod
-AEM fuel rail
-RC Eng 550cc injector
-SX fuel pump
-MSD digital 6 Plus
-SS coil and wires
-Skunk2 ECU and OBD1 conversion harness
-HKS F-CON
-APEXi VAFC
-APEXi AVCR
Drivetrain
-ACT extreme stage III four-puck clutch and Fidenza flywheel
-B&M short shifter
Comptech front and back coilover
18" Volk SE37K with Yoko Parada 215/35/18
Custom divorced wastegate hole in fender
Front lip
Autopower rollcage
MOMO 2000seats and harness
DEFi link boost
EGT fuel pressure
oil pressure and oil temp gage.
CF hood
I don't know what kind of FMIC ,maybe it's from the Drag III kit?
You think these + labor + new motor add up to $60,000 ?
Is this guy really dumped $60,000 on the $20,000 Teg?
???
Internal Mod
-84mm JE forged 9.0:1 pistons with high-tension rings
-Manley forged rods
-DSarton sleeves
-ProDrive oil pump gear
-BASZ ported head with 5-angle valve job
-Ferrea valves
-skunk2 springs and retainers
-ARP stud kit
External Mod
-Drag3 intercooler piping
-JG Edelbrock intake manifold
-Comptech fuel pressure regulator
- -6fuel lines
-Drag exhaust mani and 2.5" downpipe
-BASZ custon T3/T04 63trim turbo
-Tial wastegate
-HKS ssqu BF valve
-3" Greddy extreme 2 exhaust
-Greddy oil cooler
Engine Management Mod
-AEM fuel rail
-RC Eng 550cc injector
-SX fuel pump
-MSD digital 6 Plus
-SS coil and wires
-Skunk2 ECU and OBD1 conversion harness
-HKS F-CON
-APEXi VAFC
-APEXi AVCR
Drivetrain
-ACT extreme stage III four-puck clutch and Fidenza flywheel
-B&M short shifter
Comptech front and back coilover
18" Volk SE37K with Yoko Parada 215/35/18
Custom divorced wastegate hole in fender
Front lip
Autopower rollcage
MOMO 2000seats and harness
DEFi link boost
EGT fuel pressure
oil pressure and oil temp gage.
CF hood
I don't know what kind of FMIC ,maybe it's from the Drag III kit?
You think these + labor + new motor add up to $60,000 ?
#2
Honda-Tech Member
Thread Starter
Join Date: Apr 2002
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (EL'ation)
I have a feeling that I'm gonna get flamed for this thread.
I'm plannig(dreaming) on built B18C1 turbo and I'm scared to see how much it will cost me. But no way in hell I can afford $50,000 ~ $60,000 for my little D16Y8 econo car.
I'm plannig(dreaming) on built B18C1 turbo and I'm scared to see how much it will cost me. But no way in hell I can afford $50,000 ~ $60,000 for my little D16Y8 econo car.
#3
Honda-Tech Member
Join Date: Jun 2002
Location: houston
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (EL'ation)
well , you can easily spend upto 15k on motor.. drivetrain maybe another 2 -3 gs if you go custom gearing , theres infinite amounts on chasis tho..its very easy to, plus factor in labor!!
#4
I am a bad person
Re: How do you make a $80,000 Type-R (rOby)
I dont beleive that is cost 80k to build the car w/ car included but if it did i would never tell anyone thats what i spent on it if it was slow as that car. i didnt read the article but i was told it ran 13.2 and the editors were ragging on how slow it was and how much was spent etc...
#5
New User
Join Date: Aug 2001
Location: Golden/Denver, Co, USA
Posts: 1,025
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (rOby)
Not only did this guy not do any of his own work, but he paid some one to do the research for all the parts as well. That's the only way I can figure it.
#6
Re: How do you make a $80,000 Type-R (MotorMatrix.com)
Ya I have the issue. That car looks pretty dope but 13.2? Is he not boosting enought? I was wondering why they didn't say how much power it put down or what it runs.
#7
New User
Join Date: Jun 2001
Location: Belle Vernon, pa, united states
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (Fbp00si)
well the fact that he has gone through 6 motors since he started the car tend to rack up the money. the dude has no idea what he is doin and that car runs a lot of boost. all he does is brag. I have talked to him before and he is an idiot. that car went 13.2 on the bottle and turbo. I have heard on slicks he went 12.25@128mph though but he still is an idiot for blowing up 6 built motors. the fact that his duty cycle is probably maxed is probably why he blows up some much 550cc and 380whp don't go well together
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2002
Location: Botswana
Posts: 3,365
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (Stu)
Not only did this guy not do any of his own work, but he paid some one to do the research for all the parts as well.
#10
Re: How do you make a $80,000 Type-R
with the above setup, i don't think he's spent any more than $10,000-$14,000 on the car...
anybody who spends more on a FWD car is just an idiot IMO...
anybody who spends more on a FWD car is just an idiot IMO...
#12
Join Date: Jun 2002
Location: FT. Lauderdale, Florida, USA
Posts: 1,086
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (rOby)
No wonder he's blown 6 motors heres the problem right here........
He needs to get a standalone and get some real tuning. That car has the potential to make a shitload of power if he knew what he was doing.
-Skunk2 ECU and OBD1 conversion harness
-HKS F-CON
-APEXi VAFC
-APEXi AVCR
-HKS F-CON
-APEXi VAFC
-APEXi AVCR
#13
I am a bad person
Re: How do you make a $80,000 Type-R (TheSwift1)
with the above setup, i don't think he's spent any more than $10,000-$14,000 on the car...
anybody who spends more on a FWD car is just an idiot IMO...
anybody who spends more on a FWD car is just an idiot IMO...
#16
New User
Join Date: Aug 2001
Location: Golden/Denver, Co, USA
Posts: 1,025
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (Daniel)
I don't mind people who don't do their own work. As long as you know what's going on your car and WHY, it's all good. But if this guy actually paid someone to do the research, that's pretty sad. He probably doesn't even know what half the **** on his car does.
#18
Join Date: Mar 2002
Location: southern california, usa
Posts: 3,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (TheSwift1)
with the above setup, i don't think he's spent any more than $10,000-$14,000 on the car...
anybody who spends more on a FWD car is just an idiot IMO...
anybody who spends more on a FWD car is just an idiot IMO...
hey i know, don't rub it in
#21
Re: How do you make a $80,000 Type-R (turbo Si)
A matter of fact, If I was that guy, i would make sure anyone who knows how much I spent to keep it on the down low. Come on.........for how much he spent.....it's pathetic.
#22
Honda-Tech Member
Join Date: Dec 2001
Location: Filthadelphia Area, PA, USA
Posts: 1,568
Likes: 0
Received 0 Likes
on
0 Posts
Re: How do you make a $80,000 Type-R (turbo Si)
all I can say is if the dollar figure is accurate, i wish i owned a shop and he was my customer.