hooking up profec-b spec 2 (need help with one vaccum line)
06-03-2003, 03:48 PM
#1
Trial User
Thread Starter
hooking up profec-b spec 2 (need help with one vaccum line)
I need to know if the vaccum line that is coming out of the back of the unit inside the car since i have an external waste gate do i still need to run that line to the fuel press regualator line to read boost the directions are not clear on this casue there are different setups for external and internal waste gates any help greatly apperciated sorry about the first post computer was f---- up
06-03-2003, 05:15 PM
#2
Honda-Tech Member
Re: hooking up profec-b spec 2 (Hybrid95CivicEX)
yea the directions arent vcery clear.
that line will need a vac source, i put it where my boost gauge and stuff were on the fpr line and the big line goes from the top port of he wg to the solenoids, and thne from the solenoids to another vaC line , i just tapped into where hte bottom port vac line was going to ,
the controller works nice , youll like it , its just kinda a bitch to get used to the functions .
that line will need a vac source, i put it where my boost gauge and stuff were on the fpr line and the big line goes from the top port of he wg to the solenoids, and thne from the solenoids to another vaC line , i just tapped into where hte bottom port vac line was going to ,
the controller works nice , youll like it , its just kinda a bitch to get used to the functions .
Thread
Thread Starter
Forum
Replies
Last Post
almostboostedgsr
Forced Induction
11
03-14-2007 08:23 PM