Hondata tuners in Tennessee??
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Alcoa, TN, USA
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Hondata tuners in Tennessee??
I'm working on my turbo kit right now, and I was checking the Hondata site to find any tuners in the area. There is one in Memphis, but Turbo Tune in Greensboro NC is closer to me (this is still about 5 hours away from me).
If you guys know any GOOD, EXPERIENCED Hondata tuners in the area, please let me know. I am about 2 hours east of Nashville.
Thanks
If you guys know any GOOD, EXPERIENCED Hondata tuners in the area, please let me know. I am about 2 hours east of Nashville.
Thanks
#2
Re: Hondata tuners in Tennessee?? (crex23)
Knoxville here. The guys name is Mace. He has a FJO wideband and will street tune and or dyno tune. He made the chip for my car. it is a 99Si I bought new in 99 and at approx 20,000 miles I installed a SC, at about 80,000 miles I took the SC off and Installed a greddy kit. I ran 11psi on the SC and run 10.5psi on the greddy kit. My car now has over 114,000 miles on it. Bone stock engine. Here is his email address TeamKLR2BAR@aol.com If you want try him
#3
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Alcoa, TN, USA
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hondata tuners in Tennessee?? (intercooledJRSC)
I've heard of Team KLR before, where are they located? Also, can anyone else in the area vouch for them and their work?
#6
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Alcoa, TN, USA
Posts: 861
Likes: 0
Received 0 Likes
on
0 Posts
Re: Hondata tuners in Tennessee?? (adictionbass)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by adictionbass »</TD></TR><TR><TD CLASS="quote">hondata.com has a list of tunners for each state </TD></TR></TABLE>
I looked at their list, but I was hoping there was a shop not on the list that was a little closer to me.
I looked at their list, but I was hoping there was a shop not on the list that was a little closer to me.
Thread
Thread Starter
Forum
Replies
Last Post
sicrazed
Forced Induction
7
04-02-2004 06:40 AM