hondata, 550's,stock intank...who runs this?
#1
Honda-Tech Member
Thread Starter
hondata, 550's,stock intank...who runs this?
hey guys im going to the dyno this saturday and im not able to get the bolts undone that hold my fuel tank in. THe reason i have to drop the tank to do the pump is because i have a 92 integra which is similar to the older civics. So should i worry about this now or do it later.
my setup is b16a, drag3 turbo kit, hondata, 550's, 3" exhaust, stock fuel pressure.
will this be enough for around 12-14 psi and hopefully near 300 whp
my setup is b16a, drag3 turbo kit, hondata, 550's, 3" exhaust, stock fuel pressure.
will this be enough for around 12-14 psi and hopefully near 300 whp
#3
Honda-Tech Member
Join Date: Sep 2002
Location: Colorado Springs, Colorado, USA
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Re: hondata, 550's,stock intank...who runs this? (GITWIDIT)
I suppose, judging by the Hondata site....they say 550'cc with stock pump and fuel pressure are good for ~350hp.
http://www.hondata.com/techfuelpump.html
I use an AEM EMS and 550cc's, but the info on the Hondata site is worth reading.
Bottoz
http://www.hondata.com/techfuelpump.html
I use an AEM EMS and 550cc's, but the info on the Hondata site is worth reading.
Bottoz
#5
Honda-Tech Member
Thread Starter
Re: hondata, 550's,stock intank...who runs this? (GITWIDIT)
yeah i read the info on their site but was just concerned that the pressure under boost might be too high. say the pressure is 42 stock then 12-14 lbs of boost would put it at about 55 roughly. I think the line graph on the site showed that even at 50-55 psi fuel pressure the pump and injectors should support 300.
i was just hoping for people who are running this setup now to reassure me that everything will be fine.
i ordered the new hardware for my tank today and it will be here tommorrow. But id hate to try and get the tank out on thursday night and realize that something else is broken or missing.
i was just hoping for people who are running this setup now to reassure me that everything will be fine.
i ordered the new hardware for my tank today and it will be here tommorrow. But id hate to try and get the tank out on thursday night and realize that something else is broken or missing.
Thread
Thread Starter
Forum
Replies
Last Post