hks ssqv wont open/ relieve pressure
#1
Junior Member
Thread Starter
hks ssqv wont open/ relieve pressure
i put a used ssqv on my supra and it wont open at all low or high boost, so i took it apart and took the spring out, now it works, but stays open at idle, and close slowly at low vacuum. how can i make it work with the spring. i searched and read about a guy that replaced the spring with a less stiff one, by the way this is the old school hks with the screw on it.
Thread
Thread Starter
Forum
Replies
Last Post
got wide
Forced Induction
5
10-20-2008 09:16 AM