here's some new pics of my coated Max-Rev manifold plus turbo items
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
here's some new pics of my coated Max-Rev manifold plus turbo items
took some pics recently,the camera blows so no whining! i had it coated by Airborne Coating here in CT, looks good theres some older shots of the mani before it was coated in the 2nd page too, plus the some misc pics of all my turbo items. i'm so close to finishing i can taste it! just need another $1,000 or so to finish up...look at my sig below for the pics.
#5
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (SO3Burner)
you paint yours,i'll coat mine. this **** actually gets higher than 1000 degress, if you read the back of those "high heat" paints they state it can take 1000 degree temps for short periods of time. if high heat paint was such a great option people wouldnt be sending their manifolds or headers off to HIGH PERFORMANCE COATINGS or JET HOT!
i'm sure JET HOT and HCP have cases of high heat paint and their just jacking their customers. know what your talking about before you post.
i'm sure JET HOT and HCP have cases of high heat paint and their just jacking their customers. know what your talking about before you post.
#7
Honda-Tech Member
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (lucas569)
Damn, everyone is hatin your coating bro. I kinda like it, its like the black wheel fad.
I am going to do the bling bling polished job on my maxrev manny, kinda like the early 90's wheel fad.
Dont you hate when it your only $1000 away from your turbo kit. That has happened to me a couple times so far. Then went the hondata, then, the injectors, then intercooler, well--you get my point.....its never $1000 away--it's always $1001
[Modified by 93LSivic, 1:44 AM 3/27/2002]
I am going to do the bling bling polished job on my maxrev manny, kinda like the early 90's wheel fad.
Dont you hate when it your only $1000 away from your turbo kit. That has happened to me a couple times so far. Then went the hondata, then, the injectors, then intercooler, well--you get my point.....its never $1000 away--it's always $1001
[Modified by 93LSivic, 1:44 AM 3/27/2002]
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (93LSivic)
not everyone just this dickless mother here, this crap does get expensive but oh well, once i'm done w/ my loans in a month or so i'm going for a fully built shortblock from importbuilders. may as well do it right the 1st time.
#10
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (LsTurbo91)
i have a hookup there $75 btw i apologize to anyone that looked at this thread and had to read useless bullshit,
[Modified by lucas569, 11:37 PM 3/26/2002]
[Modified by lucas569, 11:37 PM 3/26/2002]
#12
Honda-Tech Member
Join Date: Jan 2000
Location: TX, USA
Posts: 1,627
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (SO3Burner)
oh ok. they must not have the 1000F High temp paint where you live
Quit acting like a moron.
#13
Honda-Tech Member
Join Date: May 2001
Location: FULL RACE, AZ, USA
Posts: 4,719
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (lucas569)
Looks good Edwin! pretty cool --
on a side note, anyone ever wonder what the revhard "tubular" manifold is coated with (the black stuff) ??
Ill give you a hint... VHT lol. and no, im not making this up, myles told us.
on a side note, anyone ever wonder what the revhard "tubular" manifold is coated with (the black stuff) ??
Ill give you a hint... VHT lol. and no, im not making this up, myles told us.
#14
Honda-Tech Member
Thread Starter
Join Date: Aug 2000
Location: somewhere in, CT, USA
Posts: 2,677
Likes: 0
Received 0 Likes
on
0 Posts
Re: here's some new pics of my coated Max-Rev manifold plus turbo items (FFgeoff)
hey geoff, good to hear from ya man,
revhard does that huh? does it last? according to Airborne coatings they told me the manifold is gauranteed for 3 yrs and then theyll recoat it for 1/2 price!
revhard does that huh? does it last? according to Airborne coatings they told me the manifold is gauranteed for 3 yrs and then theyll recoat it for 1/2 price!
Thread
Thread Starter
Forum
Replies
Last Post
andyvaj
Honda CRX / EF Civic (1988 - 1991)
10
03-07-2005 12:47 PM
BobGnarly
Forced Induction
9
05-31-2004 10:10 AM