help /w new turbo setup.. engine idle dropped and stalled out of no where.
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
help /w new turbo setup.. engine idle dropped and stalled out of no where.
i recently just got this motor broken in and i was wondering:
i was at a stop light, and all of a sudden i see my idle go up and down lower and lower, and then it just stalled out.. i turn it back on and it was fine.. but sometimes now my idle goes a lil higher then usual (1,300), or lower then usual(200-400). i have an RS so i have no ABS. what is wrong? anything to worry about?
heres my specs:
tuned @ 6psi as of right now. plannin on installing HKS wastegate & gauges and tune @10 psi.
B18B 1.8L Non-Vtec Head Sotck valve train, stock valve springs and retainers
- Port and Polished
B20 Block
- Bored/Sleeved 84mm
- Sleeved by Golden Eagle
JE Pistons 8.0:1 and Piston Rings
Eagle Rods
Turbonetics T3/T4 Hybrid Turbocharger
Rev Hard Turbo Manifold
Spearco Front Mount Intercooler
Walbro 255lph Fuel Pump
RC 550cc Fuel Injectors
FAL Slim Fan
HKS Super Sequential BOV
HKS Iridium Spark Plugs
HKS Super Mega Flow Intake
Password JDM Cooling Plate
i was at a stop light, and all of a sudden i see my idle go up and down lower and lower, and then it just stalled out.. i turn it back on and it was fine.. but sometimes now my idle goes a lil higher then usual (1,300), or lower then usual(200-400). i have an RS so i have no ABS. what is wrong? anything to worry about?
heres my specs:
tuned @ 6psi as of right now. plannin on installing HKS wastegate & gauges and tune @10 psi.
B18B 1.8L Non-Vtec Head Sotck valve train, stock valve springs and retainers
- Port and Polished
B20 Block
- Bored/Sleeved 84mm
- Sleeved by Golden Eagle
JE Pistons 8.0:1 and Piston Rings
Eagle Rods
Turbonetics T3/T4 Hybrid Turbocharger
Rev Hard Turbo Manifold
Spearco Front Mount Intercooler
Walbro 255lph Fuel Pump
RC 550cc Fuel Injectors
FAL Slim Fan
HKS Super Sequential BOV
HKS Iridium Spark Plugs
HKS Super Mega Flow Intake
Password JDM Cooling Plate
#3
Honda-Tech Member
Thread Starter
Join Date: Jul 2005
Location: DiEGO, CA, USA
Posts: 6,954
Likes: 0
Received 0 Likes
on
0 Posts
Re: help /w new turbo setup.. engine idle dropped and stalled out of no where. (Spec R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Spec R »</TD></TR><TR><TD CLASS="quote">sounds like an IAC problem. take it out and see if its dirty.</TD></TR></TABLE>
so its nothing to be worried about /w my motor?
so its nothing to be worried about /w my motor?
#4
Honda-Tech Member
Re: help /w new turbo setup.. engine idle dropped and stalled out of no where. (JesDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JesDM »</TD></TR><TR><TD CLASS="quote">
so its nothing to be worried about /w my motor?</TD></TR></TABLE>
i cant verify that, but i'm sure if u lived nearby i'd help u out.
so its nothing to be worried about /w my motor?</TD></TR></TABLE>
i cant verify that, but i'm sure if u lived nearby i'd help u out.
Thread
Thread Starter
Forum
Replies
Last Post