help with turbo d-series alt belt/?
#1
Member
Thread Starter
Join Date: Mar 2006
Location: Alexandria, LA, us
Posts: 1,108
Likes: 0
Received 0 Likes
on
0 Posts
help with turbo d-series alt belt/?
i changed alt belts last week
ever since then they snap shred flip over or just plain dissapear when i get on it hard.. its a 400whp d series and i rev it to 8500
i checked the pully it looks straight and good when u rev it in idle it doesent wobble its sexy looking.. the alt pully is nice looking too and it spins freely..
they both look lined up good as far as i can see
and ive been tightening them with about a 1/8th inch deflection
i tightened the dog **** out of one and it flipped itself over on the pullys and ate itself... anyone hasd this prob and or found a soloution
ever since then they snap shred flip over or just plain dissapear when i get on it hard.. its a 400whp d series and i rev it to 8500
i checked the pully it looks straight and good when u rev it in idle it doesent wobble its sexy looking.. the alt pully is nice looking too and it spins freely..
they both look lined up good as far as i can see
and ive been tightening them with about a 1/8th inch deflection
i tightened the dog **** out of one and it flipped itself over on the pullys and ate itself... anyone hasd this prob and or found a soloution
#2
Re: help with turbo d-series alt belt/? (THEDirtyDseriesWOOT)
I have has this problem, at the track I kept flipping over. I replaced the belt and never had a problem again. 1/8 in deflection might be to tight, If I recall general spec is 1/4 inch.
Thread
Thread Starter
Forum
Replies
Last Post