Help me identify parts from this head
06-07-2004, 06:29 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Location: Hialeah, FL, USA
Posts: 541
Likes: 0
Received 0 Likes
on
0 Posts
Help me identify parts from this head
OK guys, this is the story, I went to the junk yard and I found this turbocharged crx with a fully built d16a6 engine, this crx was boosting way more than 15 psi, and it even had a direct port nitrous system, I took a lot of stuff out of this crx including the head, now I need help identifying parts from this head.
All I know is that It has a JG camshaft 502T, here are the specs I found about this camshaft.
Grind 502T
Lift (IN/EX) 450 / 400
Duration (IN/EX) 260 / 254
It seems like the head was slithly ported too.
I dont know if this head has a stock valve train or not, Id like to know also about, valves, vale springs and stuff like that, I'm planning on selling this head on ebay so I need all that info.
Here is the website for pictures:
http://bellsouthpwp.net/c/r/cr...d.htm
All I know is that It has a JG camshaft 502T, here are the specs I found about this camshaft.
Grind 502T
Lift (IN/EX) 450 / 400
Duration (IN/EX) 260 / 254
It seems like the head was slithly ported too.
I dont know if this head has a stock valve train or not, Id like to know also about, valves, vale springs and stuff like that, I'm planning on selling this head on ebay so I need all that info.
Here is the website for pictures:
http://bellsouthpwp.net/c/r/cr...d.htm
Thread
Thread Starter
Forum
Replies
Last Post