HELP: Finished turbo wont run!
04-30-2004, 11:18 AM
#1
Thread Starter
Join Date: Sep 2003
Location: Coventry, Warks, England
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
HELP: Finished turbo wont run!
Hi, I live in the UK and imported a Drag Gen 3 turbo kit from importparts.com I just finished installing it.
My car is a UK spec 1993 Civic Vti with B16a2 from the factory.
Firstly the LED on the blue box for the Hondata is flashing slowly all the time.
The car starts but sounds very rough and wont rev and smells like its running very rich and the check engine light is on, sounds like "limp home mode" as described on the Hondata website.
I tried to do a fault code read but the check engine light just stays on when I bridge the connector and doesnt flash.
Any help or ideas would be greatly appreciated.
If anyone really wants to help me i'm on msn and can provide pics of everything Rapier_Nick@hotmail.com
Thanks guys
Nick
My car is a UK spec 1993 Civic Vti with B16a2 from the factory.
Firstly the LED on the blue box for the Hondata is flashing slowly all the time.
The car starts but sounds very rough and wont rev and smells like its running very rich and the check engine light is on, sounds like "limp home mode" as described on the Hondata website.
I tried to do a fault code read but the check engine light just stays on when I bridge the connector and doesnt flash.
Any help or ideas would be greatly appreciated.
If anyone really wants to help me i'm on msn and can provide pics of everything Rapier_Nick@hotmail.com
Thanks guys
Nick
Thread
Thread Starter
Forum
Replies
Last Post
ahobbs
Forced Induction
15
09-12-2003 08:41 AM