baphomet

I have a p72 that I chipped, I checked and rechecked the soldering and I have tryed reburning different programs with uberdata but all I get is the solid cell and rev limit at ~3500. The car is a stock 99 civic CX. Any idea?

Which stock rom can I burn to just check if it works with a non edited one?
p06?

If anyone will fix/test my ecu I will pay for it and or buy you . I am serious. Just so frustrated with this thing.

baphomet

BlackCRX

disable knock sensor and vtec ??

is it me or are you missing R54

baphomet

Yes I disabled them.

The P72s don't use a resistor.

0mtber

iTrader: (2)

Try burning a StockGSR.bin onto the chip....
IF you still have a solid cel, try testing on another vehicle that does not require an obd conversion harness.

baphomet

I tried resoldering, taking the ZIF out, a couple other chips, burning stock gsr, and cutting J1. Same thing. Solid CEL. rev limit 3500.

Did this ECU just take a **** on me?