H22 with T3/T67 gt37r
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: Concord, NH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
H22 with T3/T67 gt37r
I am looking for a turbo for my new motor which consists of a darton sleeved block with CP 9.0:1 pistons and eagle rods. I want to run about 20-25 lbs boost and I want it to make about 550-600 WHP. I though about using a 35r but for the same price I can get a Garrett t3/t67 ball bearing gt37r which is rated to 650 WHP. Has anyone had luck with one of these? should I just get one? oh yeah and I will be using methanol injection.
Modified by spOolin97 at 12:18 AM 3/20/2007
Modified by spOolin97 at 12:18 AM 3/20/2007
#2
Honda-Tech Member
Join Date: Jul 2002
Location: Dortmund, NRW, Germany
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 with T3/T67 gt37r (spOolin97)
I have a GT3767S myself, my build is not ready at this moment but Stan made 700+whp with this turbo, and it spools better than a T3/T67. Only problem Precision discontinued this wonderfull turbo.
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2006
Location: Concord, NH
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 with T3/T67 gt37r (spOolin97)
This is the turbo im looking at. http://www.full-race.com/catal...e3b60
Thread
Thread Starter
Forum
Replies
Last Post
booja
Forced Induction
31
01-24-2005 01:04 PM
C-Murdock
Forced Induction
12
09-30-2003 09:11 AM