to the guys who rememeber my blown headgasket prob
#1
Thread Starter
Join Date: Oct 2004
Location: ridgewood, ny
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
to the guys who rememeber my blown headgasket prob
well if u remember my old post it was about my radiator hose comeing off during 15ibs of boost...well last week i took the head off it was badly warped so i got shaved. As far as the oil leaking prob, My oil pan gasket poped under boost. So we put everything to gether new hoses new seal's etc...put the head back on and got back on the dyno... Believe it or not incresed my HP by 10 hp. I was pushing 328hp and 274tq now iam pushing 337.3hp and tq went up to 284.6. So iam back in business, going to put couple of miles on the car since it been sitting since x-mas eve. After that car is going to sleep. So ty for your help guys. thanx
here is my setup for people who dont know
h23a1 built block
GE sleeves
Port and polished head
3angle valve job
BullFrog cams with skunk2's gears
crower rods
je pistons 9:1
550rc
walboro 255
aem rail and reg
t3/t3 .63
38mm tial wastegate
blitz bov
sparco IC
MSD SCI with MSD wires
tokico gas shocks with skunk2 coilovers
brembo rotors with VGX brake shoes
Greddy profec B boost controller
HKS boost guage
Auto meter oil pressure guage
Tuned with Hondata
All work and tune was done by Ralph at D.R.T here in woodside, NY
here is my setup for people who dont know
h23a1 built block
GE sleeves
Port and polished head
3angle valve job
BullFrog cams with skunk2's gears
crower rods
je pistons 9:1
550rc
walboro 255
aem rail and reg
t3/t3 .63
38mm tial wastegate
blitz bov
sparco IC
MSD SCI with MSD wires
tokico gas shocks with skunk2 coilovers
brembo rotors with VGX brake shoes
Greddy profec B boost controller
HKS boost guage
Auto meter oil pressure guage
Tuned with Hondata
All work and tune was done by Ralph at D.R.T here in woodside, NY
Thread
Thread Starter
Forum
Replies
Last Post