gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
#327
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Before you start a forum rant about English racing and invite all that drama, I would suggest getting in touch with tuner/owner and show him that bin file. I would think any competent person could recognize at a glance something is up or its not tuned right. The problem is they are going to hear from you that some people on the internet told you the tune was wrong and disregard your concern more so. I would definitely keep it between you an them for now.
I took down the screenshots because I agree with you lightningteg. I was really pissed off when I got the car back and I just felt like all I was getting was excuses after excuses and the whole pump gas thing. Now if I take it back and does "blow up" on pump because "we told you so" I'll be totally fucked. Know what I'm saying? Ill take your advice and call and see if I can talk to the owner but I really don't see a point in talking to the tuner as he made the "tune".
#328
Moderator
iTrader: (14)
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
I took down the screenshots because I agree with you lightningteg. I was really pissed off when I got the car back and I just felt like all I was getting was excuses after excuses and the whole pump gas thing. Now if I take it back and does "blow up" on pump because "we told you so" I'll be totally fucked. Know what I'm saying? Ill take your advice and call and see if I can talk to the owner but I really don't see a point in talking to the tuner as he made the "tune".
#329
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
I agree with your logic, gutted-dx. I think it's simply best to state to the owner your displeasure, but after you've gone somewhere else to confirm our findings of the tune and then after a retune (with a hopeful change in result) that you voice your opinion to the owner. That's the best way to handle it, IMHO.
Yup that's what's gonna have to happen unfortunately. **** it I'll just be happy to be able to meet my goals when the time comes.
#330
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
So I think I'm having a surge issue. If I spool the turbo and engage the clutch slowly I get a duck call sound ( don't really know how else to explain it haha) and the normal bov sound afterwards. Definitely never made that sound before. Is that surging? I read some where a long time ago about it so I know it's bad. Should a swap out the spring or could it be something else? Also does anyone know if tail wastegate springs work in the bov?
#331
Moderator
iTrader: (14)
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
If you're just slightly going into positive pressure (like going just above vacuum) , then no. You're not having any issues. the BOV is just a little sensitive.. If, however, you're getting into good boost pressure, then its very possible. It easily just needs an adjustment. I take it you're using a TiAL BOV? what's your vacuum source for the valve?
#335
Moderator
iTrader: (14)
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
And you're certain that you have the correct BOV spring used based upon engine vacuum, and not desired boost pressure level?
http://www.tialsport.com/documents/w3_tial_qqr_sp.pdf
Definitely check how to change the springs and such.
http://www.tialsport.com/documents/w3_tial_qqr_sp.pdf
Definitely check how to change the springs and such.
#337
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Picked up a ITR manifold for $120 and while I was waiting for the guy to show up I ordered a walbro 450 for e85. I also installed a full set of CTRs last week. Too bad a couldn't install 1 by 1 for Dyno comparison but o well. I just couldnt leave it alone haha.
#338
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Finished the walbro 450 pump yesterday and drove it to work today to make sure it was running properly. It worked fine. I ran the car out of gas literally in front of the shop that's tuning it and then topped off the tank with E85. Fingers crossed as this is the final tune I will do this year I just want to run it at the track already! I'm over wanting a certain number I just want a good, reliable tune! They are tuning it tomorrow morning so I'll have updates tomorrow afternoon if all goes well.
Joe
Joe
#339
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Awesome man! Should make good power with e85 and tuner that's not afraid to turn it up a little lol. Bout time to get this thing on the track!
#341
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Im gonna keep this positive! The cars runs 100 times better! The part throttle feels amazing! PRE is a great tuning shop in Portland that I will for sure be returning too. The injectors are at 95% duty cycle but I'm very happy with the car! The Silver Surfer is everything it was supposed to be. The feeling I have right now is exactly why I built the car! Thanks everyone for your help and support.
#342
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
That's awesome man! Glad to FINALLY see your car at this power level. Enjoy it dude.
#345
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
https://www.vmsracing.com/products/d...-acura-integra
Last edited by boosted94gsr; 05-10-2017 at 02:58 PM. Reason: Added link
#346
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
I've been so damn busy and traveling lately that I've barely driven the car. Last time I had it out I couldn't see any smoke at all, so that's probably a good sign. I'm hoping to pick up some slicks this summer and hit the track when I can. I'm leaning towards those vms wheels in 13x9 with m&h 24.5x8.5 slicks. Check those wheels out if you haven't yet, you can find them for $300 shipped for 2 witch is a pretty good deal imo.
https://www.vmsracing.com/products/d...-acura-integra
https://www.vmsracing.com/products/d...-acura-integra
#348
Honda-Tech Member
Join Date: May 2008
Location: Southern Oregon
Posts: 1,892
Likes: 0
Received 0 Likes
on
0 Posts
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
#349
Moderator
iTrader: (14)
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Im gonna keep this positive! The cars runs 100 times better! The part throttle feels amazing! PRE is a great tuning shop in Portland that I will for sure be returning too. The injectors are at 95% duty cycle but I'm very happy with the car! The Silver Surfer is everything it was supposed to be. The feeling I have right now is exactly why I built the car! Thanks everyone for your help and support.
#350
Honda-Tech Member
re: gutted-dx's Sleeved B16 STC Surfer Engine Build Progress Thread.
Ive been waitin on 84mm b16 numbers for awhile. Congrats dude.
Now make it hook, and maintain
Now make it hook, and maintain
Last edited by TheShodan; 05-17-2017 at 04:38 PM.