GS-R is sold... but in it's place....
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Cenral Valley, CA, U.S.A.
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
GS-R is sold... but in it's place....
here's a run down of my new ride:
* 92 civic vx
* b16a (B18C going in within the next couple of weeks)
* ys1 tranny w/quaife
* act six puck
* act extreme pp
* lightened flywheel
* Hasport Billet racing mounts
* JDM Itr shift linkage
* JDM Itr shoft shifter
* Full-Race manifold (jet coated)
* Precision SC 63 (jet coated, hot side)
* Tial 40mm wastegate
* PWR 24x11x3.5
* 3 inch Full-Race downpipe
* custom ic piping
* turbo xs RFL
* skunk rear drag racing springs (1000lbs spring rate)
* 15" heliums, 225 BFGs up front
so i've started a new project... our goal is to hit 11s.
* 92 civic vx
* b16a (B18C going in within the next couple of weeks)
* ys1 tranny w/quaife
* act six puck
* act extreme pp
* lightened flywheel
* Hasport Billet racing mounts
* JDM Itr shift linkage
* JDM Itr shoft shifter
* Full-Race manifold (jet coated)
* Precision SC 63 (jet coated, hot side)
* Tial 40mm wastegate
* PWR 24x11x3.5
* 3 inch Full-Race downpipe
* custom ic piping
* turbo xs RFL
* skunk rear drag racing springs (1000lbs spring rate)
* 15" heliums, 225 BFGs up front
so i've started a new project... our goal is to hit 11s.
Trending Topics
#8
I am a bad person
Re: GS-R is sold... but in it's place.... (Boostfed)
looks like my old setup. your not the guy who bought it from me I dont think. did you get it from someone??
#11
I am a bad person
Re: GS-R is sold... but in it's place.... (Rhman19)
I'll be getting my new full-race manifold in the next few days. this one is even nastier than the last. can you say baby jotech
#14
Re: (nigel)
Whats the dif between SC61 and SC63? I heard the SC63 was just a big-shaft version or something? Sweet looking car though, that's gotta be a monster even with a stock B16. Is this the car that Ryan Autry's friend owned?
#15
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Cenral Valley, CA, U.S.A.
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boosted92)
* yup, this is EVOLMTR's old car.. i still have his plates. now it's my project. EVOLMTR, Ryan Autry and i are all friends. his loss = my gain. he knows i'll be taking care of it.
* MotorMatrix: are you the one he bought the turbo/mani from? if so, i dig it. it's the reason i bought the car. NOW do you see why i need those injectors??
* i HATE the color.. but what i'm i gonna do?
* the B16 spools it pretty quick considering it's open down pipe 'till tomorrow.. i'll have the exhaust/cutout done then. i have a JDM B18C that i need to pick up to drop in. that should work pretty damn well. i'm only waiting on saving some cash for in intake mani.
*"just 11's with an SC-63?"? i'm trying not disappoint myself on street tires. this thing does break traction quite easily on them. the BFGs i have on there now are niiiiiiiiiiiiiice though. i'm also gonna be on stock internals for a while, even after dropping in the B18. hell, i'd LOVE to have a 10-sec car.. i just don't wanna kill it
*the rear springs aren't TOO bad. i have a '00 Mustang GT that is lowerd and it's ride is more harsh, if you can believe that. the hatch IS a bit scary while flying down a bumpy road, though.
*Hondata is going in as soon as the B18 and injectors are in.
*taking the hatch to the track on friday. i'll post times.
thanks for all the compliments, guys. i've tried to work with the integra all i could. it has potential and i miss the creature comforts: a/c, ARMRESTS, etc... but this car has a bunch of work done for me... it's my second car, so why not go all out? thanks, EVOLMTR for doing all that work hahahaaaaa! i think Reilly is buyin' my GS-R, so at least it'll stay in the family.
kaj
Modified by kaj at 12:05 AM 9/17/2003
Modified by kaj at 12:06 AM 9/17/2003
* MotorMatrix: are you the one he bought the turbo/mani from? if so, i dig it. it's the reason i bought the car. NOW do you see why i need those injectors??
* i HATE the color.. but what i'm i gonna do?
* the B16 spools it pretty quick considering it's open down pipe 'till tomorrow.. i'll have the exhaust/cutout done then. i have a JDM B18C that i need to pick up to drop in. that should work pretty damn well. i'm only waiting on saving some cash for in intake mani.
*"just 11's with an SC-63?"? i'm trying not disappoint myself on street tires. this thing does break traction quite easily on them. the BFGs i have on there now are niiiiiiiiiiiiiice though. i'm also gonna be on stock internals for a while, even after dropping in the B18. hell, i'd LOVE to have a 10-sec car.. i just don't wanna kill it
*the rear springs aren't TOO bad. i have a '00 Mustang GT that is lowerd and it's ride is more harsh, if you can believe that. the hatch IS a bit scary while flying down a bumpy road, though.
*Hondata is going in as soon as the B18 and injectors are in.
*taking the hatch to the track on friday. i'll post times.
thanks for all the compliments, guys. i've tried to work with the integra all i could. it has potential and i miss the creature comforts: a/c, ARMRESTS, etc... but this car has a bunch of work done for me... it's my second car, so why not go all out? thanks, EVOLMTR for doing all that work hahahaaaaa! i think Reilly is buyin' my GS-R, so at least it'll stay in the family.
kaj
Modified by kaj at 12:05 AM 9/17/2003
Modified by kaj at 12:06 AM 9/17/2003
#17
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: GS-R is sold... but in it's place.... (kaj)
Very nice Jay...
Damn it ******' Pulls
Never thought a stock b16 could pull so hard w/ only 9psi.
About Spooling
2psi by 3500rpm
7psi by 5200rpm
9psi by 5500rpm
Damn it ******' Pulls
Never thought a stock b16 could pull so hard w/ only 9psi.
About Spooling
2psi by 3500rpm
7psi by 5200rpm
9psi by 5500rpm
#18
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nigel)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nigel »</TD></TR><TR><TD CLASS="quote">he told me that it breaks traction in third gear really bad. true?</TD></TR></TABLE>
With street tires? Yes.
With these 225 bfg's... It sticks very, very well.
With street tires? Yes.
With these 225 bfg's... It sticks very, very well.
#19
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: (boosted92)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted92 »</TD></TR><TR><TD CLASS="quote"> Is this the car that Ryan Autry's friend owned?</TD></TR></TABLE>
Yes, my friend Tom owned it before Jason.
Jason & Tom are both good friends.
Yes, my friend Tom owned it before Jason.
Jason & Tom are both good friends.
#20
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Cenral Valley, CA, U.S.A.
Posts: 2,904
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RyanAutry)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RyanAutry »</TD></TR><TR><TD CLASS="quote">
With street tires? Yes.
With these 225 bfg's... It sticks very, very well. </TD></TR></TABLE>
i love this car. i took my friend, Dominic for a ride tonight.. he had to grab the "oh ****" handle. let's just say he underestimated the Honda. it also launched pretty decent at 5500rpm.. i tried 6k and lit the tires through first and second... WITH the BFGs
With street tires? Yes.
With these 225 bfg's... It sticks very, very well. </TD></TR></TABLE>
i love this car. i took my friend, Dominic for a ride tonight.. he had to grab the "oh ****" handle. let's just say he underestimated the Honda. it also launched pretty decent at 5500rpm.. i tried 6k and lit the tires through first and second... WITH the BFGs
#21
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: (kaj)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kaj »</TD></TR><TR><TD CLASS="quote">
i love this car. i took my friend, Dominic for a ride tonight.. he had to grab the "oh ****" handle. let's just say he underestimated the Honda. it also launched pretty decent at 5500rpm.. i tried 6k and lit the tires through first and second... WITH the BFGs </TD></TR></TABLE>
They "should" hook nicely on the strip .
i love this car. i took my friend, Dominic for a ride tonight.. he had to grab the "oh ****" handle. let's just say he underestimated the Honda. it also launched pretty decent at 5500rpm.. i tried 6k and lit the tires through first and second... WITH the BFGs </TD></TR></TABLE>
They "should" hook nicely on the strip .
#25
Honda-Tech Member
Join Date: May 2002
Location: California
Posts: 3,047
Likes: 0
Received 0 Likes
on
0 Posts
Re: GS-R is sold... but in it's place.... (Arturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote"> Love full-race in an engine bay. </TD></TR></TABLE>