Greddy turbo kit d16z6 fitment issue - hitting block
Hey guys I picked up a greddy turbo kit for my sohc. I was test fitting it and I saw it's hitting on the webbing where there is a bolt in the block. My motor is a d16z6 and I'm wondering if maybe I got a d16y8 kit or if I got had with a different turbo as I didn't think any grinding would be necessary for a greddy kit.
Anyone ever encountered this on this setup? Is the grinding a necessary step? Can I grind that web out? I'll try to attach some photos. Any help would be greatly appreciated! https://cimg4.ibsrv.net/gimg/honda-t...b0fbdc3a9a.jpg https://cimg6.ibsrv.net/gimg/honda-t...03be8b2b57.jpg |
Re: Greddy turbo kit d16z6 fitment issue - hitting block
Take the bolt out, that is a closed hole.
|
Re: Greddy turbo kit d16z6 fitment issue - hitting block
Originally Posted by Autoworks
(Post 51669916)
Take the bolt out, that is a closed hole.
I should've investigated some more yesterday but I had just ran the oil feed stuff and I was over it. Thanks again for the response. |
Re: Greddy turbo kit d16z6 fitment issue - hitting block
Originally Posted by happyabortion
(Post 51670041)
Thanks for the response man. I was looking at the photo this morning and I'm guessing this is where the header bracket bolts to the block? If it comes down to even having to shave it I suppose this wouldnt really be a big deal either.
I should've investigated some more yesterday but I had just ran the oil feed stuff and I was over it. Thanks again for the response. |
All times are GMT -8. The time now is 04:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands