Going to build my D-Series! Need some insight/advice!
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2007
Location: Concord, CA, USA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Going to build my D-Series! Need some insight/advice!
Hello, I just picked up a stock ek with 160,000 for 2k and was planning on swapping it. But after reading all the information on building D series motors I think I'm going to go that route.
I'm looking for a setup to run mid 12's in the 1/4, yet be DD able only 20 miles a day.
I'm going to hot tank the block/head before the rebuild also.
Bottom end;
Eagle Rods
Arias Pistons
ARP Rod Bolts
I need some advice on Headwork;
Comp Camshaft
Valves? Springs? Retainers?
Not sure what to do with the head, please help !
Turbo Setup
550's
Evo9 ic
t25 turbo (open to other suggestions!)
Manifold?
suggestions?
Tuning;
Not sure yet, enlighten me!
Let me put this out there, I'm on a 2k budget for this build!
Thanks!!!!!
I'm looking for a setup to run mid 12's in the 1/4, yet be DD able only 20 miles a day.
I'm going to hot tank the block/head before the rebuild also.
Bottom end;
Eagle Rods
Arias Pistons
ARP Rod Bolts
I need some advice on Headwork;
Comp Camshaft
Valves? Springs? Retainers?
Not sure what to do with the head, please help !
Turbo Setup
550's
Evo9 ic
t25 turbo (open to other suggestions!)
Manifold?
suggestions?
Tuning;
Not sure yet, enlighten me!
Let me put this out there, I'm on a 2k budget for this build!
Thanks!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
T25 civic
Forced Induction
5
03-17-2007 06:35 AM
altoid
Tech / Misc
1
03-02-2003 07:02 PM