Go-Autoworks one of the best companies
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Go-Autoworks one of the best companies
Well I ordered my turbo kit from Greg at Go-Autoworks, just like to say if anyone is thinking about buying parts or a turbo kit then Greg is the man!
The work is superb excellent quality, and packing.
The customer service is the best. Simple and straight to the point, also help from Greg is excellent.
pic of my kit...
Top work by Go-Autoworks i'll be sure to use them again in future.
The work is superb excellent quality, and packing.
The customer service is the best. Simple and straight to the point, also help from Greg is excellent.
pic of my kit...
Top work by Go-Autoworks i'll be sure to use them again in future.
#6
Honda-Tech Member
Join Date: Jul 2010
Location: Houston, TX
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: Go-Autoworks one of the best companies
Great news, thanks ill be looking foward to ordering from Greg. Which kit did you go with/what engine are you putting it on?
Trending Topics
#10
Guest
Posts: n/a
Re: Go-Autoworks one of the best companies
Quality is so-so... fitment isn't the best either. With that being said, his customer service is top notch without a doubt. I am not sure if their quality has dropped off due to volume, but for the price and services they are hard to beat.
Just as a disclaimer - Yes, I have purchased turbo kits from him as well as other fabbed parts. No, I will not share in detail what exactly was wrong or how severe one of the faults actually was; out of respect for his company.
Just as a disclaimer - Yes, I have purchased turbo kits from him as well as other fabbed parts. No, I will not share in detail what exactly was wrong or how severe one of the faults actually was; out of respect for his company.
#11
Who is Mr Robot?
iTrader: (2)
Join Date: Jul 2004
Location: ATL - Where the Pimps and Players dwell
Posts: 21,474
Likes: 0
Received 10 Likes
on
10 Posts
Re: Go-Autoworks one of the best companies
I would say volume might be a concern. Greg's demand has gone through the roof and I don't know how quickly he can add staff to keep up with everything.
His prices are fairly reasonable... but given his parts are new to the scene, I don't know if anyone has run his parts long and hard enough to say how well they hold up under abuse
I plan on running his block fittings for my catch can setup.. I tend to fabricate most of what I need.
His prices are fairly reasonable... but given his parts are new to the scene, I don't know if anyone has run his parts long and hard enough to say how well they hold up under abuse
I plan on running his block fittings for my catch can setup.. I tend to fabricate most of what I need.
#12
Honda-Tech Member
iTrader: (1)
Join Date: Nov 2009
Location: California
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: Go-Autoworks one of the best companies
Quality is so-so... fitment isn't the best either. With that being said, his customer service is top notch without a doubt. I am not sure if their quality has dropped off due to volume, but for the price and services they are hard to beat.
Just as a disclaimer - Yes, I have purchased turbo kits from him as well as other fabbed parts. No, I will not share in detail what exactly was wrong or how severe one of the faults actually was; out of respect for his company.
Just as a disclaimer - Yes, I have purchased turbo kits from him as well as other fabbed parts. No, I will not share in detail what exactly was wrong or how severe one of the faults actually was; out of respect for his company.
#13
Honda-Tech Member
Join Date: Jun 2011
Location: Baltimore, MD
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Re: Go-Autoworks one of the best companies
20k miles on his tubular log (the one in the tuner kit), recirculated WG dump/downpipe and a few misc parts...not a single issue or complaint, and the service really is top notch.
#15
Moderator
iTrader: (14)
Re: Go-Autoworks one of the best companies
You won't run any temps significantly lower on a street application, in case that was your original thinking.
#16
Honda-Tech Member
Re: Go-Autoworks one of the best companies
Thank you for the feedback and positive remarks everyone. They are greatly appreciated.
To make a few points: If you ever have a fitment issue with one of our products, all you have to do is contact us. We'll do what we can to ge tit taken care of. We build these same parts repeatedly day in and day out. some of our jigs have changed slightly over the years as we are always looking to improve something somewhere.
We aren't really "new". We've been in business for quite some time. Our parts have been tested, proven, and taking a beating for years. Many people may have just recently heard of us; which is fine (better late than never...and we appreciate that). We've been in business since 02', in our current location since 07-08', first Mag feature was in 09.
Volume is always a "concern" as demand and order count rises. We always do what we can to keep turn around to a minimum while keeping the quality up. This means build time is slightly longer since the parts will be made and QC'd the same way regardless. We're easy to get in touch with, all you have to do is call and ask.
We use Garrett A2W Intercoolers when we have to...99% of the time an air to air will be more suitable from what we've seen.
Again, thanks. We really appreciate the continued support from the community.
To make a few points: If you ever have a fitment issue with one of our products, all you have to do is contact us. We'll do what we can to ge tit taken care of. We build these same parts repeatedly day in and day out. some of our jigs have changed slightly over the years as we are always looking to improve something somewhere.
We aren't really "new". We've been in business for quite some time. Our parts have been tested, proven, and taking a beating for years. Many people may have just recently heard of us; which is fine (better late than never...and we appreciate that). We've been in business since 02', in our current location since 07-08', first Mag feature was in 09.
Volume is always a "concern" as demand and order count rises. We always do what we can to keep turn around to a minimum while keeping the quality up. This means build time is slightly longer since the parts will be made and QC'd the same way regardless. We're easy to get in touch with, all you have to do is call and ask.
We use Garrett A2W Intercoolers when we have to...99% of the time an air to air will be more suitable from what we've seen.
Again, thanks. We really appreciate the continued support from the community.
#17
Honda-Tech Member
iTrader: (4)
Join Date: Apr 2005
Location: South, Texas
Posts: 12,903
Likes: 0
Received 0 Likes
on
0 Posts
Re: Go-Autoworks one of the best companies
I've never purchased or had any dealings with Greg or Go-Autoworks but that post above is proof of a good quality company with great customer service.
#18
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Re: Go-Autoworks one of the best companies
I would like to add no matter what anyone says, hands down they are one of the best in my opinion, it doesn't get better than Greg when it comes to customer service and quality, also shipping time is super fast!
Thanks once again cant wait to start fitting this kit
Thanks once again cant wait to start fitting this kit
Thread
Thread Starter
Forum
Replies
Last Post