germanīs question about Darton-Sleeves
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2003
Location: magdeburg, saxony, germany
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
germanīs question about Darton-Sleeves
We are planning to built a b16a2 with Roundabout +450hp.
We want to take JE-Pistons for 8,2cr and Eagle-H-Beam-Rods.
We often heard that we should take DartonSleeves to make to sleeves "unbreakable".
But can it happen that we wil get heating/cooling problems with the sleeves especially in the upper area, area short under the head. PLease remember, that we have the possibility to ride the cars over several hundreds of miles with max-Speed or very hard driving.
Can somebody give us good advises?
Excuse my English
We want to take JE-Pistons for 8,2cr and Eagle-H-Beam-Rods.
We often heard that we should take DartonSleeves to make to sleeves "unbreakable".
But can it happen that we wil get heating/cooling problems with the sleeves especially in the upper area, area short under the head. PLease remember, that we have the possibility to ride the cars over several hundreds of miles with max-Speed or very hard driving.
Can somebody give us good advises?
Excuse my English
#2
Honda-Tech Member
Join Date: Jul 2001
Location: Toronto, Ontario, Canada
Posts: 676
Likes: 0
Received 0 Likes
on
0 Posts
Re: germanīs question about Darton-Sleeves (hondaapi)
Darton makes a new sleeve called the MID - Modular Integrated Deck. It supposed to help with any cooling issues had before.
There's a small pic in my avatar or click here to see another post of mine:
https://honda-tech.com/zerothread?id=898885
There's a small pic in my avatar or click here to see another post of mine:
https://honda-tech.com/zerothread?id=898885
Thread
Thread Starter
Forum
Replies
Last Post
i HEART my Honda
Honda Civic / Del Sol (1992 - 2000)
3
12-23-2004 11:25 AM
Awar318
Honda Civic / Del Sol (1992 - 2000)
2
03-11-2004 08:17 PM