GE sleeves or AEBS sleeves which one would you choose!
#1
Junior Member
Thread Starter
Join Date: Feb 2002
Location: nj, nj, USA
Posts: 515
Likes: 0
Received 0 Likes
on
0 Posts
GE sleeves or AEBS sleeves which one would you choose!
i narrowed it down to these two companies GE or Aebs! ok which one should I pick to get my sleeves done and why? looking to do 2.0 gsr turbo motor or 2.0 gsr all motor, havent decided yet!
Modified by shadyCTR at 7:13 PM 7/9/2003
Modified by shadyCTR at 7:13 PM 7/9/2003
#2
Re: GE sleeves or AEBS sleeves which one would you choose! (shadyCTR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shadyCTR »</TD></TR><TR><TD CLASS="quote">i narrowed it down to these two companies GE or Aebs! ok which one should I pick to get my sleeves done and why?</TD></TR></TABLE>
Definately AEBS! It is more expensive but well worth it IMHO! Do it once and do it right.
Definately AEBS! It is more expensive but well worth it IMHO! Do it once and do it right.
#5
Honda-Tech Member
Join Date: Nov 2001
Location: KOP, PA, USA
Posts: 2,685
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (Kwuaymaikrup)
Darton
RS
Benson
This question will go nowhere. Its all a matter of opinion. AEBS and GE are both good companies, and both sleeves perform well.
RS
Benson
This question will go nowhere. Its all a matter of opinion. AEBS and GE are both good companies, and both sleeves perform well.
#6
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
I'm not going to recommend another company due to the fact I have only had experience with Golden Eagle.
Their customer service was great.
Their work was great.
http://photos.yahoo.com/bc/alp...iew=t
http://photos.yahoo.com/bc/alp...iew=t
Their customer service was great.
Their work was great.
http://photos.yahoo.com/bc/alp...iew=t
http://photos.yahoo.com/bc/alp...iew=t
Trending Topics
#11
Honda-Tech Member
Join Date: Feb 2003
Location: CA, USA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (93LSivic)
i thought RS Machines usings golden eagle sleeves, arent GE's the one that people have been having problems with sink? who sells and installs the AEBS sleeves?
#12
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (igotyofire)
RS Machine doesn't use GEM sleeves. GEM will not let their sleeves be installed by anyone but them.
#13
Re: GE sleeves or AEBS sleeves which one would you choose! (igotyofire)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by igotyofire »</TD></TR><TR><TD CLASS="quote">i thought RS Machines usings golden eagle sleeves, arent GE's the one that people have been having problems with sink? who sells and installs the AEBS sleeves?</TD></TR></TABLE>
NO RS Machine uses there own sleeves and I believe install Darton's in osme apps as well, GEM is their own company. AEBS has their own sleeves as well in fact Dartons were exactly the same and since AEBS patented their T Sleeves Darton is now on their third version. I personally had problems with Golden Eagle sleeves sunk TWICE but their have been many others that have GOOD LUCK with them not me or anyone local to me. AEBS sells their own sleeves and installs them also.
NO RS Machine uses there own sleeves and I believe install Darton's in osme apps as well, GEM is their own company. AEBS has their own sleeves as well in fact Dartons were exactly the same and since AEBS patented their T Sleeves Darton is now on their third version. I personally had problems with Golden Eagle sleeves sunk TWICE but their have been many others that have GOOD LUCK with them not me or anyone local to me. AEBS sells their own sleeves and installs them also.
#14
Honda-Tech Member
Join Date: Feb 2003
Location: CA, USA
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (Boostfed)
oh sorry for the confusion i was just focusing on becuase import-builders has there blocks built by RS-Machines, so i thought that RS put in the GE sleeves, heh missunderstanding on my part
#15
Honda-Tech Member
Join Date: Jul 2002
Location: Chesapeake Beach, MD
Posts: 952
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (igotyofire)
Id say GE. I personally know someone who has had a bad experience with them but from my own experiences I can only say good things. Recently my head bolt holes in the block got stripped and the head lifted. I called Vince at GE and told him I blew a gasket. He didnt ask one question at all about what happened or anything. The very next day I had a new headgasket at my door free of charge. to GE and their customer service.
#16
Member
Join Date: Mar 2002
Location: Dallas Sewers, Usa
Posts: 6,018
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (Boosted99Si)
Well your two candidates are pretty far apart in price? Any reason you narrowed it down to these two companies? If you have the $ i'd go with aebs . Have you looked into other companies such darton, rs machine, ect..?
#17
Re: GE sleeves or AEBS sleeves which one would you choose! (shadyCTR)
AEBS sleeves are made by Darton i thought. AEBS does have a patent on the sleeve design but the sleeves are actually manufactured in house at Darton, then sent to AEBS to be installed.
Darton's sleeves are damn close to the same design as AEBS...i actually like Darton better.
But if it is between AEBS and GE there is no question. GE doesn't even offer a closed deck sleeve that i'm aware of. But you are going to pay a pretty big differece for the better designed sleeve.
Darton's sleeves are damn close to the same design as AEBS...i actually like Darton better.
But if it is between AEBS and GE there is no question. GE doesn't even offer a closed deck sleeve that i'm aware of. But you are going to pay a pretty big differece for the better designed sleeve.
#18
Honda-Tech Member
Join Date: Jul 2001
Location: Memphis, TN
Posts: 1,162
Likes: 0
Received 0 Likes
on
0 Posts
Re: GE sleeves or AEBS sleeves which one would you choose! (jacksonracingsi)
GE!
Sleeving: http://www.overboost.com/story.asp?id=464
Engine Building: http://www.overboost.com/story.asp?id=1034
Sleeving: http://www.overboost.com/story.asp?id=464
Engine Building: http://www.overboost.com/story.asp?id=1034
#19
I am a bad person
Re: GE sleeves or AEBS sleeves which one would you choose! (Armaan)
I would suggest GE for the price and the quality of the product. I have mde over 600whp and had them in my car for 2yrs now w/o 1 single issue. we built 2 more GE blocks last month that have performed flawlessly.
#23
Junior Member
Join Date: Oct 2002
Location: LA County, CA, USA
Posts: 821
Likes: 0
Received 0 Likes
on
0 Posts
Re: (GSRswapandbanned)
Earl is having a good deal with Benson right now.
I'll go with Benson because nobody touch the block except himself.
Earl's phone is: 949-422-1387.
I'll go with Benson because nobody touch the block except himself.
Earl's phone is: 949-422-1387.
#24
Re: (0x64)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 0x64 »</TD></TR><TR><TD CLASS="quote">I'm not going to recommend another company due to the fact I have only had experience with Golden Eagle.
Their customer service was great.
Their work was great.
</TD></TR></TABLE>
Agreed. My block is there now as well. Ted is a class act guy no question. Anyone that knows me a little bit will know Im the biggest undecisive **** there is and his patience with me through all of this is second to none.
All of GEM whenever I call or email are extremely helpful and fast to respond, especially considering their work load (which includes who knows how many people calling them asking them silly questions and then never ever forking over the dough to have them do work).
Their customer service was great.
Their work was great.
</TD></TR></TABLE>
Agreed. My block is there now as well. Ted is a class act guy no question. Anyone that knows me a little bit will know Im the biggest undecisive **** there is and his patience with me through all of this is second to none.
All of GEM whenever I call or email are extremely helpful and fast to respond, especially considering their work load (which includes who knows how many people calling them asking them silly questions and then never ever forking over the dough to have them do work).
Thread
Thread Starter
Forum
Replies
Last Post
Topdawgg
Forced Induction
9
11-12-2006 06:41 PM